CE protective shoes safety shoes PU sole safety shoes

Products Details:

1. Description:

    Boots range TREK WORK.

Upper: full-grain leather.

Lining: Polyamide Cambrelle.

Insole: Removable preformed-polyester on EVA.

Midsole: Cemented-PU with Panoshock shock absorber.

Outsole: Rubber Nitrile.

Non metallic footwear.

2. Materials:

Upper: full-grain leather.

Lining: Polyamide

Insock (  removable ):  polyester on PU foam.

Outsole: PU / Rubber

Composite toe cap and puncture resistant outsole ( Non metallic ).

3. Functions:

anti-smashing,  anti-puncture,  anti-static,  wear-proof,  anti-oil, 

acid-proof alkali,  anti-slip,  250 °C thermostability,  cold-resistant

4. Instructions for use:

General use safety footwear for smooth and oily industrial-type floors or loose ground, for indoor or outdoor use against intermediate risks equipped with a puncture-proof sole and a protective toe cap providing protection against shocks equivalent to 200 joules and against crushing risks under a maximum 1500 daN load.

S3: safety footwear with closed back, antistatic protection, energy absorbing heel and puncture-proof sole, water-resistant upper and studded sole.

HRO: contact-heat resistant outsole, 300 °C for 60s.

HI: Heat-insulated sole.

CI: sole insulated from sun light.

5. Limits to use:

The PANOPLY guarantee can only be applied optimal-condition shoes, being used without adding up any accessories likely to generate a changer in protection, or it cannot be applied when its use is not specified in the current instructions for use. Not to be used for protection against further hazards than defined above. Not to be used within the scope of any other field of activity than that defined in the above-mentioned instructions. A removable insock is provided with this footwear. Testing was carried out on the footwear with the insock in place. Consequently, this footwear must be worn with the insock in place. It may allergic reactions in people with allergic sensitivities.

6. Instructions for storage:

To be stored in its original packing in a dry place, sheltered from sun light.

7. Instructions for cleaning/maintenance:

After any use, leave unpacked shoes in a ventilated place away from heat source. To remove clay and dust, use a non metallic brush. For stains, use a wet cloth with soap if necessary. To shoe polishing, use a standard product.

8. Performances:

Fulfill the requirements of the European Directive 89/686, speciall for ergonomics, harmlessness, comfort, airing and flexibility and fulfill therequirements of the European standards EN ISO 20344:2004 / A1:2007 and EN ISO 20345:2004  / A1:2007 S3 HRO HI CI SRC.

Resistance to slipping on Ceramic and Steel floors, for all types of hard floors for multiple uses indoors or outdoors.