1390 float glass laser engraving machine

1390 float glass laser engraving machine

acrylic snowflakes can be cut off by MC laser machine at high speed, high precision and lower consumption.

very smooth edge without bur  after cut.

no need to polish again by other tools.

1). the feature of MC1310(40w/60w/80w/100w) CO2 Laser Cutting Machine  

ing area: 1300*1000mm (width*length:mm)

Tips: worktable is with open structure. There is no limited to the length of processing materials.

A. metal-bars worktable is installed into MC1310laser cutting machine to process hard materials like wood, MDF,acrylic, plastic, stone,etc.

B. honeycomb worktable is installed into MC laser cutting machine to process soft materials like paper, fabric,leather, rubber sheet,etc. which is match with exhaust fan to fasten processing materials on the surface of worktable.

NO need other clamps to fasten processing materials.

C. motorized up and down worktable: you can put on less than 25mm materials on the surface of worktable.

Please attention that the above 3 kinds of worktable will be installed into MC1310 laser cutting machine

based on your special needs.

Please tell me which materials do you often process ? its size( length and width)?

if cutting, what is its max. thickness ?

2. laser head

high quality anti-rust laser head which inside with one pc of reflector mirror and one pc of focus lens .

Meanwhile, auto-focus device(optional part: red ) next to laser head, mainly to confirm automatically the distance between laser head and processing materials before cutting.

red dot postion shows you where the laser beam work in.

3. laser power

RECI brand laser tube:40w/60w/80w/100w/150w based on your needs to install into MC1310 laser machine.

long life and long warranty(8 months).

if cutting, what is its max. thickness ?

This question helps us to confirm how much  laser power is best for your use.

4. water-cooled tool

water chiller is used to cool laser tube down during working

less than 80w laser power, it is better to choose  Cw3000 water chiller.

more than 80w laser power, it is better to choose Cw5000 water chiller

5. Electric circuits

reliable electric circuit and leetro control system is for whole machine. and every power line will be marked by numbers so that to support after-sales service.

6. auxillary parts.

air pump is used when to process acrylic, glass,fabric, stone,etc. to keep high quality processing effect.

exhuast fan mainly used to exhaust smoke or dust, specially to engrave or cut off wood,fabric,etc.

one tool box is helpful  to maintaince. 

The configuration list of MC1310 CO2 Laser Cutting Machine  :

3       1pc of rotary device  

 which materials can you cut off or engrave by MC CO2 Laser Cutting Machine   ?

Technical parameters of MC CO2 Laser Cutting Machine  :

CO2 Laser Cutting Machine Applicable materials:

Acrylic , perspex, glass, wood, stone, marble, gravestone, rubber, leather,fabric, paper, cltoh, dual-colour boards.etc

Samples:

CO2 Laser Cutting Machine Applicabe industries: 

1. Stone Industry: marble, granite, white marble etc.

2.Artcrafts Industry: wood,bamboo, elephant's tusk,bone, leather, marble,sea shell etc.

3. Advertisement  Industry: double color board,acrylic engraving and cutting,label engraving,crystal etc.

4. Model Industry: sand table constructtion model,plane model etc.

5. Packing Industry:rubber engraving,plastic,doubling plate,die board cutting etc.

6. leather and cloth processing Industry:compound leather,man-made leather,fabric,fur ,toy etc.

7. other industry : marble,granite,glass,crystal engraving,paper/greeting card cutting etc.

Meanwhile, we produce different models of laser machine based on your special needs.

Please tell us your special needs so that the best model is for your use.

1. which materials will you process?

2. what is max. size of processing materials you will process?

3. if cutting, please tell us its max. thickness?

4.what is volatage and hz in your factory?

Look foward to cooperate with you. Please add my skype ID: myclaser012