Qingyi wholesale 3D printed fabric labels for clothing

1. Introduction: It use combine type ink, strong stereo sense ,can choose different color and different thickness. it is similar with cutting,wash ability is good.Through SGS(seven) environmental certification(formaldehyde.,total leads content,the phthalates,The eight heavy metal,azo,organotin,PAH ).

2. Main specification:

(1)Material: imported combine type material good elasticity and back elasticity, high temperature resistance and wash ability is good.

(2)particular use imported elastic material ,hand feeling soft,strong stereo sense, fresh and light color,

(3)Apply to high requirement fabrics ,such as the logo of garments,or the number of shoes/caps/bags and so on.

3. Technology information:

(1)main material:imported PU material,PET release film

(2)The thickness of ink layer:400-500um,the whole thickness :500-600um,only one color silk screen printing .

(3)the right side temperature 150-160 degrees,time 5s/time, the back side temperature 150-160degrees,15-20s/time,voltage:above 0.24kgf/cm^2.

(4)Wash requirement: home launder-ometer test: 40 degrees, more than 20times,30 min/time.

(5)Environmental certification:Through SGS(seven) environmental certification: formaldehyde,total leads content,the phthalates,The eight heavy metal,azo,organotin,PAH.

4. Store/Expiry date/Package:

(1)Placed in cold place,ban crashing with sharp things.if you can't use up while open it,seal it otherwise it will go bad in rainy day or high temperature.

(2)Standard package:100peices/bag;500peices/case;or divided into single and package each one.(it is depended on customer)

(3)The expiry date is within 12 months.

5. Attention:

(1)try the simple then produce in .

(2)Seal the rest stickers,you should dry the products,don't let them in rainy day.

(