ASTM D 3730 /GB/T 9264 Standard Sagging Tester For Paint

ASTM D 3730 /GB/T 9264  Standard Sagging Tester  For Paint

Place of origin: China   

Model Number: BGD 225

Specification:  50-275μm/250-475μm/450-675μm/650-875umd/ 850-1075μm

BGD 225 Sagging Tester produced by our company is in accordance with the specification of ASTM D 4400 and ASTM D 373. They are made of corrosion resistant stainless steel, the width of application is 75mm at 6mm per sagging thickness, and the gaps are being separated by a 1mm space as a marking on each sagging for distinctive identification of each sagging. 
        They are applicable to determine the relative sag resistance of a series of paints in order to provide the technical parameters for the paint application on site.

  
Main Technical Parameters

Clearance ranges:

1. Difference between adjacent two notches:25μm

2.Overall dimension:120×20×20mm(length by width by height)

3. The applicator can scrape 10 pcs of Parallel to the wet film in different thickness, the width of wet film is 6mm, space of each film is 1.5mm, thickness difference between adjacent film is 25μm 

Manual:

 Drawdown the coatings on a material(glass, test chart or board)using the appropriates sagging Thickness Gauges, then place the coated material at vertical position(90º)to the platform(eg: table).Allow 10 to 30 minutes(depending on the viscosity)for the coatings to sag under gravity. Check out the coating thickness without the sagging effect and the next coating thickness with the sagging effect. With that information, the recommended coating thickness is between the 2 layers of coatings.

Related Product 7

You maybe interest below product,click the headline to browse more...

Double Groove Hegman Fineness Gauge	Use For Paint Four Side Wet Film Applicator	Stainless Steel 4 Side Wet Film Applicator Effective Length 160mm
Cube Film Applicator(38um 76um)	Hand Ink Proofer For Flexo Ink Tester	Bending Testing Cylindrical Shaft Bending Device
Cross Cut Adhesion Tester For Paint	50ml Stainless Steel Density Cup	Single-groove Hegman Gauge
Digital Display BGD186 Krebs Stormer Viscometer	RDS Scrape Ink Bar From United States	GB/T 1727-92 Standard AARON Scraping Ink Rod

 

 

More product welcome to Visit our Website

 

→ RongtaiPacking