outdoor Bamboo Decking distributor

Outdoor Bamboo Decking

FSC CE qualified for flooring/siding/ceiling with 20 years guarantee 

THJ Outdoor Bamboo Decking-100% pure Moso bamboo, adopts unique patented technology, through strict manufacturing process, makes the finish bamboo board highly durable and anti-corrosion, is very popular in the modern decoration such as bamboo decking in flooring,siding,ceiling and so on. An ideal alternative for tropical hard wood.

1, Direction of installation

Direction of installation should be kept the same as that of the room length, and the floors be installed one by one from left or from right with their grooves facing the wall.A fap between floor and wall should be kept 10-15mm and need to put the wood edges.

2, Installation method of flooring

Fix the grooves and tongues of flooring, install the bamboo flooring directly on the base of ground. The end joints of flooring should be staggered (Generally speaking, on the position of 1/2 or 1/3 staggered). It doesn't need to be nailed or put glues. At the same time, we should check the straightness and flastness of flooring arrangement when installing. We should also pay attention to the color deviation, select the similar color floors to be put together. In addition, we can use the color deviation to create shade design, increase the effect of apperance.

3, Keep the flooring in proper tightness when installation

In the areas where there are great differences of moisture in different season, you should keep fitting of boards in proper tightness according to the weather condition. Floors with lower water rate should be installed loosely when under dry weather conditions; on the contrary, floors with higher water rate should be installed tightly when under damp conditions. Otherwise, the floors will be curved or swelled or isolated with the season changing.

4, The last step for installation

a, You have to cut some boards when finishing installation. In order to prevent from penetration of water or moisture, edge joints of floors must be painted where it is cut.

b, Afte installation, a few of spring sheets should be placed between the grooves and wall in way of installation without wood strip.

c, In some where of the gate and other connecting places, you have to cut some floors so as to leave enough space for welling or shrinkage, then T-molding or reduces can be installed to connect then and cover the space.Meanwhile, there must be 3-5mm space left between the bottom of doors and floor to benefit you open door freely.

d,Thickness of baseboards should be less than 14mm. It must cover the swelling gap totally.