Enameled steel water tank with hign weigh and high strength

Keywords to understand Huili water tank

SMC FRP GRP water tank

stainless steel water tank

BDF CSB water tank

Enameled water tank

Hot dip galvanized water tank

Gush-paint water tank

All of the water tank can add thermal insulation layer.

Product Introduce

1.Raw material:Enamel steel panel,Fiberglass plastics(FRP).

2.Enameled steel water tank is made of high quality material, non toxic and

corrosive. To  ensure the storage of water in the water tank meeting the

international water quality standards .

3.Installation: Standard accessories are used for on-site installation so that

materials canbe brought into restricted areas for convenient installation. 4.Lifetime: High quality materials to ensure that the water tank is not easy to

deformation ,the maximum distortion of sidewall is less than 1%for the high,the

maximun distoortion of bottom center is less than 10mm.The normal durable

litetime is more than 30 years.

Brief introduction

Enamel water tank,the use of advanced technology,choose high quality

material,through heat sintering enamel make water tank panel forming dense glaze

lqyer,and steel interface betwween iron penetration.

Panel size

Enamel sheet steel water tank is made of high quality, made into different

specifications of thesingle panel. Including: 1m × lm,lm×0.5m,0.5m× 0.5m

Advantages

1. It is not easy to deformation .

2. Strong vibration resistance

3. Resistance to impact large

4. Enamel water tank is cleaning and hygiene,White and beautiful.Ensure no

pollution to water  quality

5. Composite plate assembly at the scene.Convenient, quick and flexible and

adaptable

6. Acid and alkali resistance, corrosion resistance

7. No leaking , sealed performance is good.

8. Storage of hot water is better than other water tank .

9. Enamel water tank level off is smooth, easy to clean.

Matter needs attention

1. The water inlet pipe and outlet pipe and overflow pipe diameter, location is determined by the design.

2. The channel around the water tank shall be not less than 600 mm, and the  box at the bottom of the top is no less than 500 mm.

3.Water injection test, close the outlet pipe and drain pipe, open the inlet pipe, full, after 24 hours don't ooze water is qualified.

Assembling and check

1.There needs to keep a maintenance channel which width no less 700mm between

the vertical wall and water tank,and between horizental wall and water tank body

no less tha 500mm.

2.When constrction,finish concrete foundation first,make sure all slab joints and the surrounding of tne water tank is located on the support.

3.When finished assembled,turn off the outlet pipe and a drain pipe  first,then turn on the inset pipe,as water as examine to fill with water,no leakage in 24 hours ia qualified.

Brief Introduction

Huili enamelled steel water tank combination adopt advanced tecniques and pick

up high quality material to ensure the cleaning of water quality. Huili enamelled steel water tank is anti-corrosion, anti-aging, flexibility, no distorsion, no infiltrationand leakage. Tank is easy to clean and conveniently to install and assemble. It can storage not only hot water, but also cold water, and has

a better shockproof and shock resistant ability. It has a wide range of application. Not only applies to new construction, but also suitable for the replacement for old buildings. Enamelled steel water tank has good effect in practice for a long time. Our company have mass production and the product will be used more

universally, standardly and in series. Product quality have reliable guarantee.

FAQ

1.What's the guarantee, in case the water tank breaks down?

The water tank has one year s guarantee. If it breaks down, generally speaking, our technician will figure out what the problem may be, according to client s feedback.Parts will be replaced for free if the problems are caused by quality fault.

2.How about the documents after shipment?

After shipment, we ll send all original documents to you by DHL, including Packing

List, Commercial Invoice, B/L, and other certificates as required by clients.

3.How long is the delivery time?

For standard water tank less than 100m3, it would be 7-10 days; For non-standard

water tank and customized water tank according to client s specific requirements, it would be 15 to 30 days.

4.How's the payment?

Telegraphic Transfer(T/T).

5.Do You Arrange Shipment For The Machines?

Yes, dear esteemed customers, for FOB or CIF price, we will arrange shipment for

you. For EXW price, clients need to arrange shipment by themselves or their

agents.

6.How is the packing?

Solid Seaworthy plywood Box Package with Steel Belt, Save space as much as possible for container loading.

Packing & Shipping

1.We usually use plywood or container,of course if you have special reauest,we

would comsidr seriously.

2.We will delivery products 15 days one payment arrived.

Our Services

1.Professional water tank manufacturer.Customized design is available, OEM and

ODM are  welcomed. 2.High quality,reasonable&competitive price.High speed  forwarder services. 3.Prompt answer on Trademanager and Inquiry,will not delay 24  hours.

Company information

Dezhou Huili Water Tank Co.,Ltd.,is a combination of

designing,priducing,installation. Company products include SMC FRP GRP water tank,Stainless steel water

tank,Enamel steel water tank,Hot dip galvanized water tank,Gush-paint water

tank,etc.Of course, you can also customized  the special tank according to your

requirements.Our customer service staff will be 24 hours for service to our client .

Contact to us