porcelain enamel

Enameled storage water  Keywords to understand Huili water tank:

SMC/FRP/GRP water tank

Stainless steel water tank

Enameled water tank

Hot dip galvanised water tank

Gush-paint water tank

BDF/CSB Underground water tank

All of the water tank can add thermal insulation layer and reinforcement outside

 Product Description  

Material:The panel is carbon steel sheet made by ramming craft;

The size of the panel is: 1000*1000mm,1000*500mm, 500*500mm.

The thickness of the panel mainly includes: 5mm, 4.5mm, 3mm, 2.5mm, 2mm, 1.5mm. It is different according to the tank dimension. 

Flanges: The sectional panels shall be pressed to double flanges at the angles of 45 degree and 90 degree to the face of the plate on four sides.

Reinforcement Method: All tanks are internally braced with angle stays to endure the rigidity of the tank when filled with the water. The Top panel is supported by top panel support, which shall be made of hot-dipped galvanized material.

Advantage: 

Enamel steel tank scope is very broad, not only for new project, but also to old buildings water tank upgrade provides a convenient conditions.Water tank can store cold water, also can store 

hot water, acid and alkali resistance, permeability, leakage, no deformation, no corrosion.

 Application  

•Storage and regulation of living water supply & construction water supply.

•Temporary water storage tanks for expansion of the heating system, condensate tank and 

 construction, geological survey, industry, National defense project etc.

•Various industries, civil water supply, HVAC, firefighting, food, beverage, vintage, water 

 treatment, medicine, petroleum, chemical and so on. 

•Taking flexible, reasonable plate design, suitable for all sizes combined water tank.

Suitable for living water with PH value:6.5-8.5, using life:≥20 years

 Advantages

 1. It is not easy to deformation;Strong vibration resistance;Resistance to impact large

 2. Enamel water tank is cleaning and hygiene,White and beautiful.Ensure no pollution to water quality

 3. Composite plate assembly at the scene.Convenient, quick and flexible and adaptable

 4. Acid and alkali resistance, corrosion resistance

 5. No leaking , sealed performance is good.

 6. Storage of hot water is better than other water tank .

 Selection and using

1.Supply your water tank sizes ,the position of connective pipes and pipe diameter.

2.The water tank can be supplied with the whole sets.

3.Use water storage temperature for 4-65°c.

4.Without other  weldments inside and outside the tank,avoiding destroying the enamel surface.

5. The tank should be cleaned regularly ,When testing the water to prevent debris into the box
6.Users with the tank to take over the position of the seams on the board, the company shall be adjusted, pipe diameter is constant.

Accessories

1 Bolt. nut & washers

Option: hot-dipped galvanized material/stainless steel SS304.

2 Sealing material

Sealing material have Rubber strip EPDM, glass cement.

3 Covers

The tank cover shall be constructed from 1.4mm to 3.0mm of thickness hot-dipped galvanized material according to the requirement.

4 Ladders and Level Indicator  

Internal & external ladder shall be made of hot-dipped galvanized material/stainless steel SS304.

Installation and test

1. The water inlet pipe and outlet pipe and overflow pipe diameter, location.

2. The channel around the water tank shall be not less than 600 mm, and the box at the bottom       and the top is no less than 500 mm.

3.Water injection test, close the outlet pipe and drain pipe, open the inlet pipe, full, after 24 

   hours don't ooze water is qualified.

Certification