Pins and Unails for Artificial landscaping grass installation

U nails and pins for Artificial Landscaping Grass landscape turf installation 

 Description of artificial grass:

Pins and U nails for Artificial landscape turf installation   model L003, 4 colors with CE  certification, monofilament grass yarn type and yarn material is PE+PP.The backing material is PP+None woven.  The pile height ,  density  , backing and Dtex are all as customer order.

 Description Artificial Grass Wall : 

Many different kinds backing, PP,PP+Nonewoven,  PP+ net, net, PP+Nonewoven+net.

Description of artificial grass garden  : 

 High duribility and elastisity, clean, soft, you could touch my your hand,walk on it and also sleeping on it. Far away from the noisy work city, enjoying yourself in the nature enviroment.

Description of artificial grass garden : 

 You could choose many different packing ways, in rolls by PP bag,in pieces by woden case, in small rolls by films,etcs. 

Installing artificial lawn onto Concrete or Permanent Base

1. First of all assess how much ornamental artificial landscape turf for garden  you will need. Note: We manufacture rolls in 2 widths: 2 metres(6 feet 6 inches) or 4 metres (13 feet 1 inch) .

2. Make sure that the surface to be covered is clean and smooth ready to receive the ornamental  artificial landscape turf for garden .A self levelling compound available from any DIY store can remove surface imperfections that may show through to the top surface especially on thinner pile height products.

3. Lay the ornamental  artificial landscape turf for garden to trim off to make that perfect edge ie in doorways or up a wall. Leave for around 2 to 3 hours to settle. This helps stop any wrinkling or creasing.

4. Cut and trim your  artificial landscape turf for garden , using a sharp Stanley knife making sure are no gaps between walls and ornamental artificial landscape turf for garden .

 5. Make the joins using the correct type of seaming tape and glue - only quality outdoor tape and glue should be used.

 6. Apply the infill if required. Typically a sand mix will be used . Rake and spread the infill evenly, taking care not to over fill the surface. Note: Application of sand is best on a dry day. Remember that the infill will eventually compact so you should consider adding a final layer when settled.

 7. If installing on to a wooden surface such as decking or suspended floors a combination of adhesive and ornamental  artificial landscape turf for garden tacks can be  used.