Plastic Stick Extruding Machine (lollipop extruder)

Specifications

This plastic(PP)lollipop stick production line including frequency converter control
extruding unit, cooling water trough, haul-off&cutting unit etc.There are onecolour,two colour,three colour and four colour machine available for choose. Itis suitable for making drink straw,lollipop stick,cotton slips,all kind of small plastic tube,ball pen lead,pipe for toy,etc

Main Technical Paremeter:

50mm extruder one set:

Diameter of screw shaft:50mm

Main screw L/D: 25/1

Type of screw shaft:special treatment screw

Shaft Reduction box one set

Power:11kw

Frequency converter control(Taiwan made)

Auxiliary extruding machine 25mm x 2sets

Diameter of screw shaft:25mm

Main screw L/D: 15/1

Control power:0.75kw x 2sets

Consistant temperature section(Japan made):6 Sets

Electric control box one set

Mould for extruder 1set(additional mould can make according to buyer's requirements
6 meter stainless steel cooling water trough(including water blowing nozel).

Haul-off and rotary cutting unit( one notch,two notch or plain)

Haul-off unit fit for spiral strip and straight strip making.

Traction control power:0.75kw

Traction control type:frequency converter contol

Cutting control power:0.75kw

Cutting control type:frequency converter control.

Cutting length adjustable.

Extruding output:25-35kg/per hour(about30000-50000pcs/h

Stick length:more than 5mm

Stick out diameter:0.8-8mm

Lollipop stick wall thickness:0.8-1.0mm

Machine weight: around 1300kg