Metal Aluminum Bubble Foil Heat Insulation roll

Anti-Glare Heat Proof Double Bubble Foil   Product Introduction:

The product consists of two layers of aluminum foil with plastic bubble laminated between the aluminum foil,provides excellent insulation: Reflects up to 97% of radiant energy in addition to resisting other types of heat transfer from conduction, convection and radiation. The two side aluminum foil forms an effective barrier against moisture, air currents and vapors.

Blue Fire retardant AL+Bubble+AL heat insulation for building roof 

 Bubble foil faced insulation Application:

Roof,Ceiling,Wall,Floor,Attic,Livestock Shelters,Basement,Factory buildings,Duct wrappings,Container liner,Sun-stop cover and vehicles.

1.       Thermal insulation and light inflecting in the constrction and protection for both cold winter and water piper 

2.       Separation of refrigerator,warm keeping for center air-conditioned,refrigerator and other home appliances

3.       Thermal insulation,sound absorption and noise reduction for car ,train, refrigerator car and laboratory, moisture proof cushion for traveling.

Bubble Insulation Installation Methods & Pictures:

• Measure the metal roof to determine the amount of bubble foil wrap insulation required for the project. Purchase approximately 10 to 15 percent more product than required to account for overlapping and to provide the proper air gap between the purlins -- the horizontal lengths of wood that support the roof panels between the rafters.

• Cover the metal roof purlins with double-sided adhesive tape. Unroll the foil wrap insulation and attach it to the first purlin. Continue to unroll the foil insulation and attach it the remaining purlins, paying attention to allow the insulation to sag at least 1 inch between the horizontal members. The sagging provides an air gap that raises the insulation’s efficiency.

• Continue to attach the Aluminum foil bubble insulation to the metal roofing purloins, overlapping the adjoining sheets 2 inches as you go. This is a temporary hold to keep the bubble foil wrap in place while you prepare the next step.

• Secure the bubble foil to the framing members with furring strips. Attach the furring strips perpendicular to the purloins every 24 inches to the framing members with 2-inch metal screws, paying attention to not disrupt the insulation’s sagging. Use a drill equipped with a screwdriver bit to drive the screws into the framing members.

• Cover the seams of the bubble insulation with foil tape.

Application

1.As heat and light (radiant) barrier for the roofing of housing;

2.As the interlayer between floor and the ground to prevent moisture and heat;

3.As an disposable and budget underlay insulation material for carpets;

4.As protective outer package for industrial machines, vehicles and home appliance

UV additive can be added according to different requirement.

Metal Aluminum Bubble Foil Heat Insulation roll Package

Delivery time : 10-15 days after received deposit

Shipment : 20'GP, 40'GP,40'HQ for ocean shipment

Payment :  By L/C or T/T

You can choose to ship by Fedex, DHL, Ocean or Air according to your need.