Stand Set for Physics Experiments

Specifications

Detailed Product Description

Utility Stand

1.One big A shaped base: there are M6 balance screws on the three legs. One small A shaped base. The top leg has a screw cap. The other two legs have M6 screws. All the holes are 12.3mm in diameter; they can balance the base to horizontal level.

2.Two stand poles and .

3. They are 12×500mm and 12×7000mm in diameter respectively.

4.3Four clips , can firmly clip handles that are 6-14mm horizontally or vertically.

5.4One flask clip has springed opening which can hold 0~35mm objects.

6. It has butterfly-shaped locknuts.

7.5One all-direction clip. Its rotation mode is made of a ball and a ball case.

8. Adjusting angle is 120 degree.

9.It has a M8 screw to tighten, can hold 6~14 objects.6One desk-edge.

10.One edge can be held to a platform that is no less than 70mm in thickness.

11.The other edge can hold tight a pole that is 12mm.7One iron loop, its opening can be 120 degree, it can hold a flask or other objects that are more than 70mm in diameter.

12.8one round tray. it can be used as a portable platform when necessary.

13.9four suspending hooks, and one hook pole.

14.The hook and pole can hold no less than 1kg object, can be used in experiments like single pendulum or cohesion.10one insulation pole , made of one 12×120mm insulation pole and one connected 12×215mm metal pole.

15.Two connecting-line poles with good insulation.

16.Parallel string and loop string, etc..choosing some of the parts can form various kinds of supporters.

17. For example, you can also combine the two sets.

18.A few examples are below for references.

19. In experiments, you can use them accordingly.