TPM Vacuum Dehydration Plant for Oil-water Separating

TPM Vacuum Dehydration Plant for Oil-water Separating 

TPM vacuum oil water separator is specially for separating water for oil, it adopts vacuum distillation technology, and can quickly and completely remove water from oil. TPM is a good filter machine for cooking oil, engine oil, lube oil, insulating oil, turbine oil etc. For cooking oil, according to the treated oil usages, we can choose different machine body. For edible usage, we suggest to choose stainless steel body. TPM is good economic benefits, widely applied in petroleum, food, chemical, mining, metallurgy, electric power, transportation, machinery manufacturing, railway etc.

Machine Features:

1. TPM vacuum filtration system adopts the vacuum distillation technology to remove water, odor, alcohol and volatilization materials to Inhibit acid value and peroxide value increases.

2. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.

3. Unique and advanced dewatering System.

4. Adopts interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank

  heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.

Working principle

Under vacuum and negative pressure state, the water can be vaporized in lower temperature. The higher vacuum state; the lower of water boiling point, the water is vaporized faster. Even under same temperature, water can be moved faster under higher vacuum state. Oil goes into heater, the Oil temperature goes up when heated. Then oil goes in to vacuum separator to become oil film by the film sprayer. In vacuum separator, water becomes vapor, and discharged by vacuum pump. After that, oil is transferred to out.

Main Spare Parts Introduction

1. Gas and water separator: the water in heated oil become vapor in vacuum tank, then the vapor become liquid water due the low temperature in Gas and water separator. The Gas and water separator not only reducing the temperature of vacuum pump, but also it can reduce the frequency of changing vacuum pump oil so that it can enlarge the lifetime of vacuum pump.

2. cooling liquid of Cooler of vacuum pump(note: water-cooling vacuum pump has such device, wind-cooling vacuum pump does not have such device): it is used to cool the vacuum pump body to protect the vacuum pump’s damage from high temperature.

3. Vacuum pump: exhaust the gas in vacuum tank

4. Oil pump: transfer the oil which is exhausted the gas to outside.

Specifications:

NAKIN Company products list as following:

ZY-high effective vacuum transformer oil purifier, oil filtration

ZYD-Double stages Vacuum insulating/transformer oil purifier, oil treatment, oil purification

ZYM-Mobile/trailer type Vacuum transformer oil treatment, oil filtration machine

TY-Vacuum Turbine oil purifier, oil treatment Plant

TJ-Coalescence and separating light/fuel/gasoline oil filter, oil purifier machine

TYA-Vacuum Lubricating oil purifier/hydraulic oil purification

TYK- Phosphate ester fire-resistant oil purifier, oil filtration machine

JZS-Engine oil regeneration system, waste oil recycling

JYWL-Horizontal-closed type filtration device

TPF-Waste cooking oil recycling machine

BZ-Transformer oil regeneration device, oil purifier

PF-Plate pressure turbine/transformer/engine/diesel/hydraulic oil filter, oil purifier machine

JL-Portable turbine/lube/insulating oil purifier, oil filtering, oil filter

NKVW-Vacuum pump system

IIJ-II-BDV oil tester, insulating oil dielectric strength tester

NKEE-Oil moisture sensor, water content sensor