2015 Hot selling screed concrete vibrator,robin concrete vibrator,hand held concrete vibrator

Electric concrete vibrator

Gasoline concrete vibrator

Pneumatic concrete vibrator

Photo image display

Specifications  

Electric concrete vibrator

Gasoline concrete vibrator

Pneumatic concrete vibrator

Weight: 18KG

Power: 2.2KW 

Vibration frequency: 225HZ 

Vibration amplitude: 1.35mm 

Power supply: 3 phase 50HZ380V

Weight : 48KG 

Power : 4KW 

Vibration frequency : 200HZ

Vibration amplitude : 1.15mm

Fuel consumption : less than 395g/kw-h

Weight: 15KG

Using air pressure: 0.4-0.5MPa

Vibration frequency: 200HZ

Vibration amplitude: 1.15mm

Rated speed: 3000r/min

1. Should be the vibrating rod mounted on a solid foundation, anchor bolts should be of sufficient strength and tighten, also in the middle of the foundation must leave the underground tunnel, for frequent adjustment and maintenance.

2. Before use, should check and test run, check the parts are intact, all fasteners, especially bearing bolt seat, an eccentric block bolts, motor and gear box bolt etc., we must firmly fasten.

3. Vibration rod is not good for long time operation. In the production operation, we must place a solid and reliable template lock clamp, to ensure that the template and the concrete surface vibration.

4. The gear box is loaded with high speed and heavy load, so it should be lubricated and cooled. The oil should be kept in the specified level, and the working temperature should not exceed 70.

5. Shaking table all bearing should regularly check and regular cleaning replace grease, good lubrication of the bearing, and should pay attention to check the bearing temperature rise when overheating should immediately try to eliminate.

6. Power cord and cable connector should be insulated, and the motor grounding performance should be good and reliable, and there is no leakage phenomenon.

7. Vibrating rod surface should be kept clean and flat, so that contact with the steel mold is good. Due to the high frequency and heavy load of the surface vibration, easy to produce cracks, we must pay attention to check, timely repair. Every shift should be cleaned in time.