2014 Laboratory Roller Crusher With Automaitic Cutter-chute Division System

Specifications

1. Automatically finish crushing, mixing and dividing, which makes sure the precision and avoid manual error;

2. It shows good performance to the material with the moisture not exceeding 15%;

3. Automatic cutter-chute division system makes sure the representativeness of sample;

4. Even discharging size without blocking up;

5. Full-sealed design and equipped with dust extracting outlet which meets the environment requirement;

6. Mechanical-electrical integrated controlling and it is easy to operate;

7. Total electro-static coating surface which makes good apparance and easy to clean;

8. Removable shell which is convenient for daily maintance and inspection of the machine;

9. All moving parts have the safeguard which meets the requirements of work safety;

10. It can work normally on the flat ground without fixing any base.

• Typical Applications   

This machine is used for making medium hardness ores or other solid material samples to the size of less than 3mm-0.5mm (adjustable) and the weight of 1/2-1/16 of feeding material for component analysis by crushing and dividing continuously. (The inspectations show the sample accurancy of this machine meets the requirements of national standard and without any systematic difference.)

Especially suitable for sample preparation work in the laboratory of industry of coal, electricity, nonferrous metal, chemic, metallurgy, environmental protection agency, scientific research and so on.

• Technical Parameters