Fully Stocked Factory Supply 10*10 Steel Car Tent

1.Our tent frame is very hard , Q195L steel tube is used afterplastic-spraying process and will not rust. 

 2.Our which is dacron cloth compounded withPVC, waterproof and sunproof.

 3.Our technology is very advanced , the  sewing machine  we  used are controlled by computer which can cut automaticly.

 4.Our products are very rich ,we have many types for you to choose.

.

10Our team is very enthusiastic, Our service is very professional 

 In the customer needs to sample ,two days can be a mormal product sample ,need to print logo can be out of the sample in ten days

Q:HOW TO car tent USE?

A:1.Stand frame upright ,Starting at the corners ,with partner standing on the opposite side grasp the two outer legs ,slightly lift the frame off the ground and step backward stopping at full arms length,

2Unfold the fabric canopy pack,;lace the fabric top over the top frame.Use the Velcro pads to secure each corner of the cover to the frame under the plastic caps .

3Each partner should then grasp the bottom of the middle frame section where it forms diamond.Lift slightly and slowly walk backward util the frame is fully extended.Be careful not to pinch your fingers or pull backward too hard as this may result inthe bending of cross beams