Mini high-quality electroplated diamond dental polishing bur set

Long Straight Shank (HP)

These shanks fit into the nose cone of the slow speed handpiece once the prophy angle or contra angle is removed. They are used for diamond cutting discs or long 40mm burs. The main use of HP burs is in the trimming of small herbivore cheek teeth.

Latch-type Shank (RA)

These shanks fit into the latch of the contra-angle on slow speed handpieces. They are generally 20mm long and available in the same shapes as FG burs.

Friction Grip Shank (FG)

These shanks fit into the latch of the contra-angle on slow speed handpieces. They are generally 20mm long and available in the same shapes as FG burs.

Round Head

These heads are used for cavity preparation, access points and splitting roots of small teeth. The most useful sizes are 330 and 330L

Pear Head

These heads are used for cavity preparation, access points and splitting roots of small teeth. The most useful sizes are 330 and 330L

Crosscut Tapered Fissure Head

These heads are used for sectioning multi-rooted teeth and reducing crown height when disarming dogs. The most useful sizes are 700/700L and 701/701L.

Finishing Burs

These heads are used for finishing restorations, soft tissue recontouring, alveolaplasty, enameloplasty and odontoplasty. They can be obtained as 12 or 30 bladed burs in carbide steel or as diamond heads of various shapes. They are also available as white stone, for composite, or green stone, for amalgam.