XH-W1505 Hot and cold automatic switching 2 relay output temperature adjustable automatic thermostat controller

 We offer one stop service for all kinds of electronic components such as ICs, Diodes,

Transistors, Optocouplers, Capacitors, Resistors, MOSFET, Crystal, IGBT modules,

Fuses, Connectors, Switches, Adaptors, Potentiometers, etc..

We only sell the original new items!

Contact us:

 All Emails or trade manager will be answeredwithin 30 minutes. If out of working time, we may can't be to reply immediately, but we will answer once we back to work.You're welcome to ask any details!

Our websit:http://www.keeppower-ic.en.china.cn

 Description:

1. Performance summary

The controller uses the industrial microcomputer control system, stable performance, simple operation, the whole temperature and temperature control can be accurate to 0.1 degrees, by setting the upper and lower temperature range, such as 24-30 degrees, when the temperature is lower than 24 degrees, start heating , When the temperature is higher than 30 degrees to start the cooling, when the real-time temperature is in the interval, then no heating, nor cooling, in order to achieve constant temperature control.

2. Product parameters

Product Name: High - precision microcomputer digital thermostat

Specifications Model: XH-W1505

Temperature range: -50-110 ℃

Temperature measurement accuracy: 0.1 ℃

Input voltage: DC 12V / 24V (depending on purchase model)

Measurement input: NTC10K waterproof sensor (1 meter)

Measurement output: two relay outputs

Product Size: 79 * 52 * 29mm

3. Press the key to indicate

The main window displays the current real time temperature when the power is turned on

ENT key, press once to save the set value, long press to achieve the switch machine

SET key, long press to enter the main menu (P1-P6)

"+" Plus key: increase the panel display value

"-" minus key: decrease panel display value

H indicator: Heating indicator

C indicator: Refrigeration indicator

4. Internal setting instructions

Panel display P1-P7 any value, press the Set key once, enter the P1-P7 internal settings.

Press "+" "-" at this time to change the P1-P7 internal value.

Press the "+" key once to display the upper limit of the temperature. Press "+" for 5 seconds to set the value

Press the "-" key once to display the temperature lower limit and press the "-" key for 5 seconds to set the value

Power off state while holding down the "+" "-" key, to the board power, you can restore the factory default

P1: heating delay

When the temperature is lower than the interval will not start heating immediately, need to run the p1 value will start, P1 value set in seconds, if you do not need to delay, need to start immediately, you can reduce the set value of 0, , The corresponding heating indicator will flash.

P2: cooling delay

When the temperature is higher than the interval will not start heating immediately, need to run P2 value will start, P1 value set in seconds, if you do not need to delay, you need to start immediately, you can reduce the set value of 0, The corresponding cooling indicator light will flash.

P3: High temperature alarm

Can set a set of temperature value for the high temperature alarm, when the temperature is higher than this value, the screen temperature flashing, the buzzer drip, when the temperature is lower than the high temperature, the alarm automatically released.

P4: low temperature alarm

Can set a set of temperature value for the low temperature alarm, when the temperature below this value, the screen temperature flashing, the buzzer drip, when the temperature is higher than the low temperature, the alarm automatically released.

P5: temperature correction

When the temperature value and the actual temperature error, can be corrected by this function, the corrected value will automatically be added to the real-time temperature. Current display temperature = last display temperature + correction value.

P6: Data lock

When set to ON, the set value can not be changed. To change, please set it to OFF and then change!

5. Use method

1. Press the "+" key to display the upper limit temperature, press and hold the 5 second digital beep, press the "+" "-" key to change the upper limit temperature

2. Press the "-" key to display the lower limit temperature, press and hold the 5 second digital beep, press the "+" "-" key to change the upper limit temperature

Set the upper and lower temperature, the controller began to automatically perform!

6. Case demonstration:

A boiler to maintain the water temperature at 80-90 degrees, that is, the water temperature is greater than 90 degrees, the thermostat to stop heating, when the water temperature dropped to 80 degrees, start the thermostat began to heat.

The detailed setup steps are as follows:

1. Set the upper limit temperature to 90

2. Set the lower limit temperature to 80

3. Set up at this point

7. Thermostat wiring diagram

Wiring instructions:

The thermostat is the relay output, the output contact is equivalent to a set of switches, the need to connect the series of equipment to the power supply circuit

8. Precautions

1. Please install this control in a ventilated and dry place.

2. This product is not close to the use of fire, away from children, so as to avoid the risk of electric shock!

3. Non-company technicians do not open the machine without authorization, if any, please contact us.

Best Quality Assurance:

1. We only provide theoriginal new items, 100% make sure the best quality!

2. 90-days GUARRANTEE OF QUALITY (After Our Delivery Date).

Payment Methods :

We accept T/T, West Union, PayPal , Escrow payment .

Refound or Replacement:

We accept return back itmes if the goods still remain in their original condition on the warranty time .

Company Infromation:

Keep Power Electronic Co., Ltd.

1.More than 5,000,000 own stock inventory to meet your needs of different products.

2.Competitive price advantage helps to save your purchase cost and your precious time.

3.Own the international advanced testing equipment of electronic components and scientific storage system to ensure the quality stability.

4.Excellent elite team, more than 3 years seniority, and a good understanding of international market trends.

5.Remarkable international reputation and keep a fixed philosophy.

Our Offices and meeting room in Shenzhen

Our Warehouse

Our Product

WE ACCEPT ANY FORM OF COOPERATIONS,

LOOKING FORWARD TO BEING YOUR RELIABLE LONG-TERM PARTNER.

IF YOU HAVE ANY QUESTION, YOUR'RE WELCOME TO CONTACT US.

BEST WISHES FOR YOU AND YOUR BUSSINESS.