20 Years Old Maker Plastic Extrusion Mould for 19mm Thick Board

20 years old maker plastic extrusion mould for 19mm thick board

1. Hangers-style structure.
2. With the restrictor bar of 90 degrees, which can meet the demand of different thickness products, the upper lips and the lower lips can be changed, and regulated which can meet the demand of different specifications.
3. All sides of the mould plated chromium and used high-strength bolts with 12.9 grades.
4. The heater make of nice stainless can be control heating.
5. Steady production, the structure is simple, easy to remove and cleaning.
6. Production of thickness: 6mm-40mm.
7. Suitable for: PE, PP, PMMA, PS, PVC materials etc...
8. Mould width: 600-3500mm.

  We are specializing in the production of plastic mould manufacturers. The company has been engaged in the development, design and make of various types of plastic mould. Especially injection mould, extrusion mould and die-casting mould.
  We company always takes "not purse big profit, but make friends worldwide" as the objective, warmly welcome friends to visit and seeking common development.

Management & Team
  We have gradually built a self-developed management pattern for several years, which is the principle of “clear assignments, specific responsibility, checked promotion, smooth cooperation and high efficiency operating.”

Technology research & Development
  We have been paid attention to long-term technological layout, at all times fetching in, research and development, betaking newest technology and technique, emphasizing on technology innovation and products researching.
  We have passed the certificate of ISO9001:2008 International Quality System, controlling products quality, consummating, guaranteed by strict inspection.

Provides detailed product introduction and overall quotation service.

Plastic Extrusion Mould, Samping Mould, Rubber Mould, Plastic Injection Mould and Plastic Parts

Q: Are you trading company and manufacturer?

A: We are factory.

Q: What about the leading time?

A: About 35 days after down payment.

Q: What is your terms of payment?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance, balance shippment.

If you have another question, pls feel free to contact us.

Q:How about the packing and shipping?

A: We have wooden case for packaging. If you have any other special requirements, please feel free to contact with us.

Q:Can I have our own logo on the mould?

A:That's ok to have your own logo on the mould. Please contact with us to make sure the detailed things before placing order.

Contact: Mrs. Merry Company:Qingdao Juxing Machinery & Mould Co., Ltd.  Tel: 86-0532-86626133 Fax: 86-0532-82231127 Skype:juxing_mould TradeManager: cn220049738 Website: http:// Address: 23, Juxing Road, Nanguan Industrial Zone, Jiaozhou, Shandong Province, China