home products metal antique outdoor lamppost for sale NTILP-012Y

                        Norton Factory

  We strive to recreate the most authentic heavy duty vintage style lamp posts available. With decades of manufacturing experience and expertise each lamp post is rigorously created using traditional methods and materialsEach old style lamp post features a robust, high detail cast iron base with central channel to feed electrical cable.

The base also has 4 pre drilled fixing points to ensure a straight forward installation.The lamp post is cleaned and pre treated to ensure maximum life span, finally we use a traditional powder coat process to add the final protective layer to these vintage lamp posts. If you're looking for something which will undoubtedly remind you of old fashioned street lights, these lamp posts are perfect.

1) Firstly dig the necessary trench from your desired Lamp Post installation area to your power supply. Typically the pad size is between 2-3ft cubed, using a root anchor if the ground is of an uncertain quality.

2) Into the trench place your conduit which has already been threaded with electrical cable. Using the excess cable, thread the lamp post and lantern and connect the bulb holder, ensuring it is earthed. 

3) Ensure the conduit rises out of the concrete pad central to your lamp posts final location  and pour the cement mixture into the base area. Allow the cement sufficient time to completely harden.

 4) Once hardened, the Lamp Post should be erected and using a small masonry drill bit the fixing points marked onto the ground. Once marked using the full size masonry drill bit, drill 4 holes into the cement base. The masonry rawl bolts are typically M10 size

5) Remember to do this gently as it is very easy to un-thread the nut which allows the bolt to tighten. Typical rawl bolt hole depth is the entire length of the rawl bolt. Once in place the Lamp Post base can be placed back in position over the 4 holes and the bolts tightened.

6) Once installed we advise covering all stainless steel fixings and masonry rawl bolts with a metal based paint, to complete the look and seal any bare threads.

Please note we always recommend a qualify electrician or trade professional is used to install your lamp post. We cannot take any responsibility for improper installation.

    We have a very strict quality controlling system from purchase to shipment which promises that goods we produced are always of the best quality.