Vacuum forming plastic sony CD display tray

Specifications

Vacuum forming plastic sony CD display tray

1. Vacuum forming plastic sony CD display tray

2.The max size:4000*2000*1000mm. 

Common Materials for plastic vacuum thermoforming

Depending on your application there’s a range of polymer sheets available on the market. However, if you’re looking for short runs, one of your biggest issues will be colour matching.

Unlike Plastic Injection Moulding, which is an additive production system, Vacuum Forming is subtractive. Often basic colours are available freely, but anything beyond that will be difficult to source unless you’re looking for one ton loads or above.

When choosing a plastic, you’ll need to consider application. Will your product be used inside our out? Will it be exposed to extreme heat or cold? Does the product need to withstand high impact? Are you looking for something that’s fire retardant?

As a general rule of thumb, we work to the following guidelines.

PVC – Fire retardant, Good for outdoors use, Often used for non food based packaging and toy manufacture.

PE – High wear resistance and impact strength, High temperature resistance, High energy absorption, Self lubricating.

PP – Hygienic, impact resistant, ideal for food applications.

ABS - High rigidity and impact strength, Excellent chemical and abrasion resistance, Easily machined to close tolerances. Used for interior and exterior trims, machine parts, trays and home appliances.

HIPS – Often used for food, dairy and medical packaging applications where taste/odour sensitivity is key.

PC -polycarbonate,it is a most strong material, with high strength and elastic modulus, high impact strength, wide range of     usage temperature.

Our factory is professional in plastic vacuum thermoforming more than 10 years of experiences. offering many different kinds of plastic vacuum thermoforming products.Could make the products according to customers’ design drawing .

we have the biggest vacuum forming machine in guangdong,it can reach 4000*2000*1000mm.

Address : 6th Floor, Bldg. N, Jinxiongda Industrial Park, Xingyuan Road, Datanglang Village, Dalingshan Town,Dongguan,Guangdong,China(mainland)

Tel :+86 769-82868066

Fax:+86 769-82868099

Mobile :+86 13825780422 (Amy)

Skype:chaomei911

Website :

some picture for your reference

Our standard manufacturing steps for our products :

1.what is vacuum forming or thermoforming ?  

Vacuum forming is a simplified version of thermoforming, whereby a sheet of plastic is heated to a forming temperature, stretched onto a convex, or into a concave, single-surface mold, and forced against the mold by a vacuum (suction of air).

2.How is the vacuum forming or thermoforming to process?

1>.The process begins by fixing a sheet of plastic of uniform thickness onto a sturdy frame. This frame is inside the vacuum           chamber. Then the frame is heated and slowly lowered over the buck, until the frame touches the bottom of the chamber and the soft plastic is draped over it.

Walcome to order and visit our factory