48v/60v to 24v ,10a dc-dc buck power converter

Unisolated DC-DC Converter

No isolation DC-DC Converter

Converter

Converters

Isolated dc to dc converter

Isolation converter

Car converter

Electric vehicle converter

The  DC-DC converter series uses high-frequency inverter technology, its size, weight, energy consumption, efficiency and other performance and reliability are better than other similar products,

       Wide input voltage range (36 ~ 75V) can meet the different voltage levels of electric vehicles.

Performance Introduction:

    High inverter frequency, fast response, small size, light weight, low power consumption, high efficiency, materials, energy conservation;

    A wide range of anti-voltage fluctuation, strong ability, high control accuracy;

   It has a whole over temperature, output reverse polarity, output overcurrent and short circuit protection, safe and reliable;

    Low temperature, high temperature, humidity, sour, dust, vibration environment adaptability strong, stable and reliable;

    The modular design of the circuit configuration, installation and maintenance quick and easy.

  Features:

1. Short-circuit protection: When the output short-circuit converter stops working, remove the automatic return to work after a short circuit;

2. overcurrent protection: When the output current reaches the current value converter protection to stop working;

3. over-voltage protection: When the output voltage is higher than the rating of the converter stops working.

Technical parameters:

1. Input voltage: 36v ~ 75V

2. Input Current: <10A (full load)

3. Working Frequency: 250KHz

4. Output voltage: 24.0 ± 0.2V

5. Output current: 0 ~ 10A

6. Maximum power: 240W

7. Efficiency: 90% typical

8. Voltage stability: <1%

9. Load stability: <1%

10. Insulation resistance: between input and output between> 50MΩ between Input and enclosure> 50MΩ Output and enclosure> 50MΩ

11. Weight: 0.25Kg

12. Start Delay: Within 2 seconds

13. Operating temperature: -30 ℃ ~ + 55 ℃

14. Size: 116 * 50 * 35MM

15. Wiring instructions:

         Input section: coarse red is positive, thick black is negative;

         Output section: coarse yellow (blue) is positive, thick black is negative