Rural area solar led street light system/solar power street light 15w 25w 30w 40w to 650w

Rural area solar led street light system/solar power street light 15w 25w 30w 40w to 650w 

Solar power street light system converts solar energy to electricity, and use microcontroller technology to control the charging and discharging of storage batteries to guarantee that the lighting system works according to specific requirement. During the day, the solar panel converts sunlight into electricity, which is then stored in the re-chargeable battery. In the night, the light turns on automatically using the electricity stored during the day. The use of solar power with energy-efficient LED lights make the system environment friendly and economical to light up streets, highways etc.

Solar power street light system consists of solar panel,lighting fixture,rechargeable battery, controller,Pole .

 solar power street light Advantages

Solar street lights are independent of the utility grid.

Hence, the operation costs are minimized.

Solar street lights require much less maintenance 

Compared to conventional street lights.

Since external wires are eliminated, risk of accidents is minimized.

This is a non polluting source of electricity

Separate parts of solar system can be easily carried to the remote areas

Solar Panel for solar power street light

Solar panel is one of the most important parts of solar street lights, as solar panel will convert solar energy into electricity. There are 2 types of solar panel:mono-crystalline and poly-crystalline.Conversion rate of mono-crystalline ,solar panel is much higher than poly-crystalline.

Lighting Fixture for solar power street light

We have various light , recommend the LED light .

LED is usually used as lighting source of modern solar street light, as the LED will provide much higher Lumens with lower energy consumption. The energy consumption of LED fixture is at least 50% lower than HPS fixture which is widely used as lighting source in Traditional street lights. LEDs lack of warm up time also allows for use of motion detectors for additional efficiency gains.

Rechargeable Battery for solar power street light

Battery will store the electricity from solar panel during the day and provide energy to the fixture during night. The life cycle of the battery is very important to the lifetime of the light and the capacity of the battery will affect the backup days of the lights.

Feature 

1.Real green and environmentally friendly batteries

2.Extremely low internal resistance and self-discharge rate

3.Long life design

4.Fit for use in regions of high altitude and wider range of temperatures

5.Excellent performance in capacity recovery

Controller for solar power street light

Controller is also very important for solar street light. A controller will usually decide to switch on /off charging and lighting.Some modern controllers are programmable,so that user can decide the appropriate chance of charging, lighting and dimming.

Feature 

1.12V/24V automatic identify or user-defined working voltage

2.High efficient Series PWM charging, increase the battery lifetime and improve the solar system performance

3.Use MOSFET as electronic switch, without any mechanical switch

4.Multiple load control modes, increase the flexibility of the load output

5.Gel, Sealed, Flooded and user-defined battery type option

6.New SOC method of calculating accurately displays the available battery capacity

7.LandStar BP has no keys , The control function and the switch condition of the load can be modified by communication connection

8.Use of standard Modbus communication protocol for TTL-232 bus connections, communication protocol compatibility much better

9.Support firmware upgrade

10.Fully encapsulated PCB, IP67 protection

11.Aluminumhousing

Pole for solar power street light

Strong Poles are necessary to all street lights, especially to solar street lights as there are components mounted on the top of the pole: Fixtures, Panels and sometime batteries. And wind resistance should also be taken into consideration when choosing the pole.

Feature

1.Hot dip galvanizing(HDG) process make sure 10 years rusty and 20 years lifepan.

2.Precision cutting make sure every parts mated perfectly,very easy for you to install.

3.Dismountable parts save more shipping space,saving your money.

Company Certifications

If have any doubt or want to know further about solar products,please feel free to contact us or send inquiry .