FN510 Field Wireless Multi-Function Module

 Product Information

   FN510 Field Wireless Multi-Function Module

Field Wireless Multi-Function Module with “Field Wireless Communication Module FN110” is connectable with a field wireless network as a field wireless device. This product acquires sensor data from a connected sensor and transmits it to a field wireless network through FN110. Refer to General Specifications of “Field Wireless Communication Module FN110” for an overview and detailed information.

•  Various Input / Output functions:

   Analog input, digital input/output or pulse input are selectable.

•  Connect various sensor to the field wireless network:

   This product transmits sensor value acquired from a 4-20 mA analog device to the host system via field wireless network.

•  Installation flexibility:

   Cable elimination allows installing a device at locations where it was previously either inaccessible or cost-prohibitive because    of cable management and cost.

•  Small and lightweight housing with LCD:

   This product has a small and lightweight housing with a built-in LCD that displays the process data and communication status.

Specifications

Table 1. Input / Output Function Summary

*1: The input channels are non-isolated and share one common ground.

*2: Do not apply a voltage to a DI or PULSE from the outside.

*3: The digital output terminal is configured as open-drain. The voltage and current applied to a digital output terminal should be within the specified range.

*4: Minimum time required to detect an eternal contact becomes off.