3095MFA Mass ProBar Flowmeter

Rosemount 3095MFA Mass ProBar® Flowmeter

The Rosemount 3095MFA Mass ProBar Flowmeter integrates the strengths of the Rosemount 485 Annubar® sensor with additional high performance characteristics provided by the Rosemount 3095 MultiVariable. The flowmeter accurately measures static pressure, temperature, DP, and calculates dynamically compensated mass flow, through a single pipe penetration. The Rosemount 3095MFA Mass ProBar® provides higher accuracy over a wider flow turndown than traditional DP technology and provides the most advanced method of measuring flow.
 

Single Device Measures Three Variables: Continuously measures DP, pressure, and process temperature through a single pipe penetration

Mass Flow Output: Dynamically calculates compensated mass flow

Easy Configuration: Easy to use Engineering Assistant enables comprehensive configuration, maintenance, and diagnostic functions

Integral Temperature Measurement: Annubar sensor incorporates an RTD through a sealed thermowell allowing removal without system shut-down

Reduced Total Installed Cost: One device, instead of three, allows simple installation and low maintenance costs

Applications for the Rosemount 3095MFA Mass ProBar Flowmeter Series

Ideal for gas and steam measurement applications in a variety of industries, including:

• Oil and Gas Production
• Refining
• Petrochemical
• Power
• Utilities
• Pulp and Paper
• Natural Gas
  
  

  General Specifications
  Accuracy	+/- 0.9% of mass flow rate for gas and steam
  Turndown	8:1
  Output	4-20mA signal based on HART® Communication
  Sensor Material	316 Stainless Steel or Hastelloy® C-276
  Mounting Options	Pak-Lok, Flanged with opposite side support, Flange-Lok, Threaded Flo-Tap, and Flanged Flo-Tap (note: Manual and Gear Drives are available for both of the Flo-Tap mounting styles)
  Line Size	2-in. to 8-in. (50 to 200 mm) – Sensor Size 1 6-in. to 36-in. (150 to 900 mm) – Sensor Size 2  12-in. to 72-in. (300 to 1800 mm) – Sensor Size 3