4-8mm CE & ISO9001 Toughened Low E Glass

Specifications

Rider Glass – 4-8mm CE & ISO9001 Toughened Low E Glass

RAW MATERIAL MELTING	TIN TROUGH	COOLING KILN	CUTTING	FINISHING

  LOW-E GLASS

1. It is one of coated glass that has higher reflection to the sunlight, wavelength from 2.5um to 25um and is also called Low-E coated glass. And it is divided into two series of colorless transparence and colored Low-E coated glass. Used in middle and high latitudes, colorless transparence glass’ transmittance is higher than 70%. It can stop heat energy indoor from scattering to raise temperature indoors. Used in low latitudes, colored glass also called Sun-E glass, can sunshade to a certain degree at the time of preventing energy from out.
2. "Low-E Glass” refers to a series of high-performance, low-emissivity products manufactured by Rider Glass introducing stare-of-the-art vacuum sputtering coating equipment.
3. The vacuum sputtering process coats glass surfaces with several layers of different materials. Among these, a silver layers effectively reflects infrared rays while maintaining excellent thermal performance. Beneath the silver layer is an anti-reflective tin oxide (Sio2) base layer that increases the transparency of the glass. Above the silver layer is an isolating nickel-chromium (NiCr) alloy coating. The main function of the top anti-reflective tin oxide (Sno2) layer is to protect the other coating layers. This product offers the high transparency, low reflectivity, and good thermal insulating and energy-saving properties required of modern architectural glass and green building design.
4. It has good spectrum selectivity, could take over the near infrared ray and visible light from sun, could block off quite a few infrared ray going indoors. It not only keeps the light brightness indoors, and also decreases the heat load indoors. It has the advantages of saving energy, environment protection, comfortable living and blocking the UV radiation etc.

TEMPERED GLASS

1. Tempered glass is produced by heating annealed glass in a furnace to 620°C. Progressing from the furnace, the glass is rapidly cooled with jets of cold air, inducing compressive stresses to the surface while the center remains tensile.
2. 4-5 times stronger than annealed glass of the same thickness.
3. Stronger resistance to thermal breakage than annealed or heat strengthened glass
4. If breakage occurs the glass breaks up into small, cubical fragments, which are not threatening to humans.
5. Suitable for use as a safety glass as defined by consumer product safety association 16CFR 1201, ansiz 97.1 1984 and BS6262.
6. Conforms to American Standards ASTM C1048. All work done on glass (beveling, cutting, bending, etc) must be done before tempering.
7. Ideal for areas with high wind loads and areas where human contacts is an important consideration, Rider’s tempered glass is the perfect option for architects who must meeting building codes and safety requirements. Moreover, it is the only glass strong enough to withstand high levels of thermal stress, a common reason for breakage in building facade glazing units (see table below). These safety features also make it an exemplary choice for automotive applications. Guaranteeing quality, Rider applies heat soak testing to all of its tempered glass before packaging and loading. It is available in all of Rider’s standard float thicknesses and sizes.

RIDER'S ADVANTAGE

1. We manufacture a wide range of glass to meet your different demands: Float glass, Tinted glass, Stained glass, Laminated glass, Mirror glass, Aluminum mirror, Silver mirror, Reflective glass, Online coated glass, Patterned glass, Figured glass, Wired glass, Colored glass, Tempered glass, Toughened glass, Safety glass, Shower doors glass, Emulsificated glass, Acid-etched glass, Obscure glass, Sandblasted glass, Solar glass, Ultra clear low iron glass, Low-E glass, Obscure glass, Glass block, Glass brick, Picture frame in different colors and sizes.
2. 20 years' manufacturing experience.
3. Rider Glass is your best choice of one-stop glass procurement.
4. Professional Glass Supplier.
5. Glass Manufacturer.
6. Glass Exporter.
7. Glass Factory.
8. Glass Enterprise.
9. Glass Company.