358 High Security Fence/358 Mesh Fence/358 Fence

Heights

2000mm, 2400mm, 2700mm and 3000mm heights are available.

Mesh Size

75mm x 12.5mm produced with 4.00mm +/- 0.10mm wire.

Panels

Manufactured using 4mm wire welded at each intersection creating a strong and durable panel, the mesh aperture consists of a 76.2 x 12.7mm mesh spacing providing ultimate protection against climbing and cut-through with excellent see through visibility. Standard mesh panel width is 2515mm.
2000mm (H) x 2515mm (W)
2404mm (H) x 2515mm (W)
2430mm (H) x 2515mm (W)
3000mm (H) x 2515mm (W)

Posts

Standard posts are manufactured from 60 x 60 up to 2.4m high, rolled hollow section and include stepping provisions to suit on-site conditions. Standard post centres is 2480mm. All posts include bolt-through or threaded inserts. Extra length posts can be used to increase the fence heights above standard heights.
60 x 60 x 3 RHS c/w clamp bar and M8 cup square bolts complete with cone nuts through posts.
80 x 40 x 3 RHS c/w clamp bar and M8 cup square bolts complete with cone nuts through posts.
80 x 80 x 3 RHS c/w clamp bar and M8 cup square bolts complete with cone nuts through posts.

Fixings

Specially designed securing clamp system is used for quick and easy installation.
Clamp bar 40 x 5mm - M8 cup square bolts complete with cone nuts.
All fixings are tamper-proof and anti-vandal.
Please note: Hole centres on fixing detail can be reduced from 304mm to 152mm for additional security. Post section is determined by the height of the fence.
Hot-dip Galvanizing
BSENISO 1461 standard to achieve the highest quality and most reliable galvanized finish.

Powder coat surface

BSEN 9002 (2000) Quality Assurance benchmark. A wide selection of colours is available.