optical fiber Mechanical splicer

Specifications

                                  Mechanical splicer

1.Product Introduction 

    With the increasing popularity and promotion of FTTH construction,optical fiber fast quick connecting and optical fiber mechanical cold technology had been developing, two new light path docking and welding products was born:Optical fiber fast connectors and optical fiber mechanical splicer.

    Mechanical splicer can realize mechanical splice,Compared with the traditional hot melt technology,the biggest advantage is no welding machine and the power supply and other hard conditions,In any way need to splice,can simply realize splice by manual.make the construction Conveniently, at the same time, greatly reduce the cost of welding.

2.Product Feature

•Can realize 0.25 mm and 0.9 mm optical fiber docking,Both sides operating will not affected each other.

•Combined V-Groove structure,By using optical fiber bag layer positioning technology, precision positioning of optical fiber, design insertion loss less than 0.10 dB.

•By using optical fiber axial flexible laminating technology, proper elastic space, ensure the both ends of the core completely in alignment.

•Nonmetallic gland guarantee the take off of force, 125 um naked fine solid tight force more than 500 grams, optical fiber fixed fastness far greater than similar products, in the highest degree of stability.

•Barrier-free wear fine design, ensure that optical fiber wear fashionable, not have pollution powder, which will influent in quality.

•Optical fiber matching liquid is stable, performance won't be influented  by the outside environment

•mechanical splice can be reused, five times less than the original would not affect the performance, to reduce the cost

•Don't need special optical fiber length setting cutting tools, simple operation 

3. technical parameters

Insertion loss (dB) : < 0.2

Return loss (dB) : > 45, in 40 °C and 85 °C-long work and normal temperature additional loss compared more than 0.3

Tensile strength (N) : more than 4.4

Coating security layer diameter (um) : meet the coat coating a diameter of 250 to 900 µ m

4, environmental requirements

Working temperature:-40 °C ~ + 70 °C.

Storage temperature:-40 °C ~ + 80 °C.

Relative humidity: 85% or less (+ 30 °C).

Atmospheric pressure: 86 kPa ~ 106 kPa.