Digital Electronic ballast 1000W/Digital dimmable electronic ballast/Grow light electronic ballast

Digital Electronic ballast 1000W/Digial dimmable electronic ballast  

  Run at 100%, 75% or 50% power
• Strike both Metal Halide and High Pressure Sodium Bulbs
• Accepts 120v or 240v (Both cords included)
• Allows 50 Hertz to 60 Hertz
• Runs 15% cooler than other digital ballasts on the market
• Has a Power Factor of 99.9%
• The most stable output frequency of any ballast
• Higher lumen output than magnetic ballasts
• Light weight and care free

This ballast will dim the bulb down to (50%)500W or (75%)750W reducing light output but more importantly reducing heat output too.  When plants are small they require considerably less light which is why we place a 1000W light three feet away, however the amount of heat produced when running a bulb at full power is sometimes difficult to control thus the added dimmable feature on this ballast makes enviromental control much easier.  The Super Lumens setting also allows you to over run the bulb to increase light output (not metal halide) and therefore maximise potential yields.

This ballast will run both metal halide and sodium lamps

Product Description

HID HPS/MH Digital Electronic Ballast for 1000W HPS/MH Lamp

TIDESTAR ballast power range:70W,150W,250W,400W,600W,750W,1000W

Voltage input range: 100Vac~268Vac

Rating V. In: 120/240Vac

Input frequency: 50Hz~60Hz

Power factor: >0.99

Efficiency: 95 %( Max)

THD: <10%

Output power: 1000W

Current crest factor: <1.5

Output frequency: >30K Hz

Protection of short circuit: Available

Protection of open circuit: Available

Protection of ignition failure: Available

Protection of thermal: Available

Protection of end of lamp life: Available

Weight: 3.05kg/6.72lb

Max. Lamp distance from ballast: 15m/49ft

Operating temperature range: -30º C~+50º C

Dimension (L X W X H): 350X111X79 (mm)/ 13.780X4.370X3.110 (inch)

Max case temperature (T C): 90º C

Safety and regulation: IEC61347

EMC: EN55015