Specifications

Engine

Make and model…………………..………….. WD615.62

Type………….. Diesel 4-stroke direct injection engine, 6-cylinder in-line with water cooling, turbo-charging & intercooling

Displacement................................................ 9.726 liters

Maximum output………………..…..266 HP@ 2200 rpm ( 196KW @ 2200 rpm )

Max. torque .......................... 1100NM@1300-1600 rpm

Bore ………………………………………………...126 mm

Stroke ………………………………………………130 mm

Mean piston speed ………………………………11.5 m/s

Compression ratio……….……………………………16:1

Specific fuel consumption …………..……...197 g/kWh

Engine oil filling quantity ……………………….19 liters

Cooling system filling quantity  ……………….40 liters

Thermostat with 71℃ opening begin Rigid fan

Clutch

Model………...........................................................φ420

Type ..............Single dry plate, compressed air assistant 

Plate diameter..........................……….............φ420mm

Gearbox

Type..….........................………..... FULLER  8JS100B

No. of speeds ................................ 8 forward, 1 reverse

Forward ratio................................ 11.4; 7.94; 5.63; 4.06; 2.81; 1.96; 1.39; 1.00

Reverse ratio... .........................….........................11.35

Front axle

Type.…….Rigid stub axle with double T-cross members

Max. load............................................................ 6500Kg

Tandem axle 

Type..........……………….…………Pressed axle housing, single reduction with planetary wheel reduction

Ratio..............................................……...………….....4.8

Max. load.......................................................….13000Kg

Frame

Type................................ parallel ladder with U-profiles and riveted cross members

Steering

Type.....................................................................ZF8098

Ratio................................................................……..26.2

Fuel tank capacity…………………………..…..400L

Wheels and tires

Rim……..............................................…..............8.50-20

Tire ……..........……………….……Triangle 11.00-20 /16

Quantity………………………………………………….7

Brakes

Service brake.................Double circuit pneumatic brake

Parking brake.............. Spring-powered air-cut off brake

Assistant brake..................Engine exhaust brake

HOWO Cabin 

All-steel forward control, 70° hydraulically tiltable to the front, 3-arm windscreen wiper system with 3 speeds, laminate windscreen, with casted-in radio aerial, 

Electric equipment

Operating voltage ………...…..24 V, negative grounded

Starter…………………………………………24 V, 5.4 kW

Alternator……………………………………..28 V, 1500W

Battery voltage / capacitance……….……2x12V/165Ah

Cigar-lighter, horn, headlamp, fog light, reverse light

Front wheel alignment 

Camber.…………………………….………………..........1º

Caster.....………………………….…………………........3º

King pin inclination...……………………………….......1º

Toe-in(measured at the wheel diameter φ648mm with cross-ply tyre) ....……………………..…...3-4.5mm

Overall dimension (length×width×height) .....………….………….....8400×2496×3700mm

Body dimension (length x width) …….…4500 x 2300 x2000mm

Wheelbase....………………….………......4600+1350mm

Track

Front.....…………………………….….……….....2022mm

Rear.......…………………………………………...1830mm

Approach angle...………………………………….......18º

Departure angle.......…………………………………...17º

Performance

Max. driving speed......………….……………....90 km/h

Turning circle diameter ..……………….….......... 16m

Mass parameter

Kerb mass.……………………………………........9070Kg

Total mass.........……...…………………………. 19000Kg

Diesel air compressor: 1 units

Model: WY-3/7-A

Flow: 3m3/min

Working pressure: 0.7Mpa

Rotating speed: 1000r/min

Cooling: air cooling

Diesel power: 25 Kw

Kerb mass: 1200kg

Grease pump: 6 units

Grease air pump

Modle: A75-G

Air input ressure: 4~9Kg/cm2

Barrel Capacity: 200L

Pressure ratio:45:1

Grease Output Pressure: 180~405Kg/cm2

Deliver Rate: 30cc/sec

Hose Length: 20 ft

N.W.:26.5kg

G.W.:28.5kg

Grease pipe: 10m with grease gun and automatic pipe winch