Large Capacity flour sieve food processing with CE

wooden case , standard exporting packing .

Large Capacity  flour sieve food processing with CE

When your product including impurity, and the impurity content is not more than 10%, it will best suitable for DZ flour sieve.

 Special structure design :

 Sorting machine use two unbalanced-weight gyratory motors mounted on opposing exterior sidewalls of the unit (instead of one motor positioned beneath the screening chamber), reducing minimum height requirements significantly.

  How many apertures is it suitable  ??

 This innovation also enables the bottom outlet to be located directly below the top inlet, allowing material to fall vertically through the screen at high rates. Available from 600mm.800mm.1000mm and 1200mm in diameter.

The flour sieve 'customer :

Features of flour sieve:

(1). Compact, light weight, mobility,

(2). Low noise and pollution,

(3). Less energy consumption and easy installation.

(4). The machine outlet can be connected to any direction. Sieved material can be discharged straight away, suitable for automated operation.

(5). No blockage on screen, high efficiency, applicable for 400 mesh or finer.

Introduction

    . 

Daily maintenance:

1. before running

   (1) To check coarse mesh and fine mesh if there is damage

   (2) Each group clamps is locking.

2. Running

   (1) Notice any abnormal noises

   (2) Electric current is stable

   (3) Whether the vibration is abnormal.

3. after running

   (1) After used clean up the vibration every time

   (2) To inspect regularly the coarse mesh, fine mesh and the spring if there are fatigue and damage

   (3) Whether each part of the vibrating body caused damage due to vibration.

   (4) Need to add the site to be the lubricating oil

Technical parameters

 Note:

1. Material: SUS 304 / Q235A / 316 L.

2. Voltage: 380V /400V.

3. Voltage: 380V /400V, Frequency:50 / 60 HZ.

4. If the specification or appearance has changed, we will not notify additionally.

Our service

Before Sales:

1> Accept customer consultation, according to the customer demand; determine the scale of factory management, providing solutions.

2> For customer training and technical personnel; 

3> According to customer request, design and manufacture products;

4> The company sent engineering and technical personnel to the user scene, planning for the optimal design of the flow field, and the solutions;  

5> For customers in relevant technical documents. 

Medium-sales: 

1> Acceptance of the product; 

2> Assist client protocol construction scheme;

After-sales:

1> On-site training personnel;

2> Appoint special after-sale service staff, arrived at the scene guide clients installation and commissioning; 

3> Regular visit customer, consult with the customer feedback, come true with the customer's two-way communication.