Granulator

Product Application

The granulator were used for shredding the waste plastic or rubberas the 1st or 2nd shredder,include the plastic film,plastic bottle,plastic bag,waste tyre,etc,when recycling them.It can output the particles with 2-30mm.which is optional.

Features

 · Compact design minimizes on-site space requirements
· Inclined, split cutting chamber design
· Oversized, outboard spherical rotor bearings – prevents bearing damage due to product migration
· Precision machined rotors (Forward set V-Rotor as standard)
· Replaceable wear plates at either end of the rotor shaft
· Standard machines are prepared for air extraction
· Stand Alone Electrical Control Panel - using quality Schneider (Telemecanique) components and Siemens PLC’s
· Tested, Approved and Certified to the applicable CE safety standards

V type rotor

The standard open V-Rotor is suitable for most types of material. The double shear, V configuration of the forward set blades creates a highly efficient double scissor cut.

C type rotor

The C-Rotor is a heavy duty, high inertia, semi-closed design which creates a cascade cutting effect intended for processing hard or thick materials and also profiles. 

VS type rotor

A rear set V-rotor design with the blade mounted behind the support is also available for certain, lighter duty applications or granulation of pre-shredded materials.

S type rotor

The S-Rotor is intended for lighter duty applications. The greater shear angle and single shear design results in better performance when processing flexible materials such as plastic film.