ZXQ-5 Full-automatic metallographic specimen mounting machine

ZXQ-5 Full-automatic metallographic specimen mounting machine

This machine is a kind of full-automatic metallographic specimen mounting machine with turnover water cooling function, it is used for mounting all materials (thermosetting property and thermal plasticity), after setting the heating temperature, holding time and applied force etc, and then put the specimen and mounting materials, close the lid, press the working button, it will be finished to mount by itself, not need person on side. It could be changed the four specification moulds according to different specimen need, of course, it could be pressed two pcs specimens at the same time, preparation capacity doubled.

Technical parameters:

1.Mould specification: φ25mm  φ30mm  φ40mm   φ50mm

2.Power supply: 220V 50HZ

3.Max power consumption: 1600W

4.Intensity of pressure system range: 0~2MPa ( relative making specimen intensity of pressure range: 0~72MPa)

5.Temperature range: room temperature~180℃

6.Holding time setting range: 0~99min 99second

7.Cooling type: water cooling

8. Weight: 110kg 

9. guarantee term:  12 monthes

10. Packing: wooden case

Please feel free to contact us if you are interested in our products, we will offer the top quality and best service for you. thank you very much!

Factory

 Workshop