HR 1I-15 Automatic High Speed Rotary Hot Melt Bottle Labeling Machine

HR 1I-15 Automatic High Speed Rotary Hot melt Bottle Labeling Machine

Use range of hot melt bottle labeling machine

The hot melt labeling machine suits for many different industries, such as mineral water, soft drink, seasoning, wine, cosmetics etc. most of this kind of label paper are plastic label paper, some of them are pre-cutting label paper and stick roll label paper.

The hot melt cutting and roll gluing labeling machine suit for stick roll label paper, the pre-cutting spraying hot melt labeling machine suits for pre-cutting label paper. This series labeling machine can labeling many different kinds of shape bottles, such as round bottles, square bottles or others.

Features of hot melt cutting and roll gluing labeling machine:

A Special way of reel for standard, with large capacity standard volume and glue box.

B Computer-controlled in-feed roller and cutting knife can cut label cleanly and correctly. The cutting position and labeling length are controlled relaxed through program.

C Only inject less hot melt on the first edge and the tailing edge, low glue consumption.

D It has advantage of small amount of glue, low attrition rate, large length labeling, and high precision.

Simple operation

A Colorful touch screen

B Convenient and fast to set parameters

C Setting parameter by multi-level authorization management.

D Display the fault status through the form of text and dynamic interface.

E Show visually the current speed and output.

F Accumulate the output of different stage.

G Switch freely between automatic and manual mode.

H Easy to understand and operate

I   Protection of faulty operation.

Labeling machine advantage:

A Automatically paste the ring body containers on round, oval, square, polygon, label materials for different kinds of plastic film(opp).

B The special way of reel for the large capacity of the label roll and glue box.

C Computer program control of the roll and the rotating cutter is clean and accurate cutting labels, the label length , cutting position which is controlled by program, easy to adjust.

D Only the heading edge and trailing edge of the label is daubed very narrow hot strip, liquid cement consumption is very low.

E According to different containers and requires owning the space of upgrading.

F Adopting international advanced full servo drive, high –performance sensors achieve intact position of the container. 

Factory

Workshops