High-end produce with good quality Copper wire drawing machine/Aluminum PVC PE separator

1. The material of the waste wire can be telephone wire, household electric wire, automotive wire and cables, diameter should be 0.5-25 mm.

2. Just needing 1-2 workers to operate, labour-saving, small land occupancy and investment

3. Combines many processions into one,  the whole process is controlled by PLC, including crushing, conveying, dust collecting, separating process. It can recycle both the copper granule and PVC plastic.

4. Can separate the copper granule from the plastic by the winding separation and the vibrating separation at last. The copper purity can be 99.9% 

5. No need water during the whole process, no dust, no environmental pollution.

  Copper Wire Drawing Machine Process:

 1. Starting of Copper Wire Drawing Machine :

Please make sure all the machines are in good condition. Before getting started, please keep the machine unloaded running for 5-10 minutes.

2. Feed inlet of Copper Wire Drawing Machine

Please clear up iron from the mixed cables, avoiding damage to crusher blade.

3. Fine crushing of Copper Wire Drawing Machine

If there is any abnormal noise, please stop and check the crusher. Change different size screen, if the copper granule is too fine or too much copper without separating from plastic

4. Vibrating separator of Copper Wire Drawing Machine

After curshed, the mixed material will be delivered to vibrating device. The copper fro vibrating separator is complete copper without plastic,

while the copper clad from the opposire discharging hole needs to be second crushed.

   Technical Data of Copper Wire Drawing Machine