High Efficiency Aluminum Plastic Separator/separation/separating Machine

High Efficiency Aluminum plastic separator/separation/separating machine           

Aluminum-plastic panel recycling equipment, is also called Aluminum plastic separation machine (aluninum-plastic panel separation and polyethylene-aluminum composite pipeline (PAP pipes) separation): This technology mainly used for recycling all kinds of PE-aluminum composite panels, PVC-aluminum composite panels, PAP pipes, aluminum-plastic bottle cap materials, car decorations, medical blister, etc. And it also can be used for separating and recycling all kinds of eletric wires, cables and aluminum-plastic products. The main advantage of this machine is it can process big materials, which can be directly put into big crusher by grab crane. Then through second level crushing and three-level crushing to make the separation. The materials after separation can be dirctly classified to metal and plastic at once through the vibrating screen. This technology has low cost, high efficicency, and the recovery rate can reach to 99.8%. Also this technology adopt dry type separation, no need heating, burning, washing and checmical material, thus don't have any pollution 

Photo show of High Efficiency Aluminum plastic separator/separation/separating machine

Our auminum-plastic panel recycling equipment adopts patent design, which has many advantages as below:

♦ Environment friendly - Our auminum-plastic panel recycling equipment is a kind of environmental protection equipment, which improved the traditional fire burning and water washing methods which are not good for the environment. For our auminum-plastic panel recycling equipment , there are not waste water, waste smoke and dust pollution during the whole process.
♦ High automation - Our auminum-plastic panel recycling equipment adopt high automatic operation system, the whole production line only needs 1-2 workers to operate is ok.
♦ High recovery rate - Our  auminum-plastic panel recycling equipment  can be equipped with electrostatic separator, the copper recovery rate can reach to above 99.8%. Normally we can make no plastics in the metal and no metal in the plastics.
♦ Wide application - Our auminum-plastic panel recycling equipment can process all the metal and non-metal composite materials with certain size. Only need to adjust or change the equipment screen and the separation parts.

And it can directly separate very big material, like the entire aluminum-plastic panels or other panels with the wideth of 1.8m, thickness of 14mm and all kinds of metal-plastic lumps with the diameter no more than 1.8m.

♦ Durable in use - The crushers all use the hard and antiwear cutter, which is durable and long-lasting, thus to have a long usage life.
♦ Small land occupation and easy to install - Our auminum-plastic panel recycling equipment has compact structure which requires small land size. And it's easy for disassembly and installation with convenient maintenance. And it has many different kinds of assembly ways, which can fit in different sites.

♦ Pre-sale Service

(1) According to the customers' special requirements, provide the most suitable project design, process design and the purchase program.

(2) Guide customers to choose the best and economical plant, recover investment within short time, and site inspection.

♦ On sale service

(1) Welcome you to our factory for a visiting;

(2) Accompany you to check our machine production, quality and  the working conditions.

(3) Customize the equipments strictly according to your special requirements and arrange the timely delivery.

♦ After-sale service

(1) Installation guidance

When the machine arrives at your company, we will dispatch our technicians to your factory to guide the installation and commissioning at site.

(2) Technical training

We provide free technical training service to your stuff. Training content contains the main work principle of machine, operating regulations, maintenance methods and steps, safety, etc.

(3) Warranty

Three guarantees of our product quality, warranty for one year (not include man-made damaged). We will maintain the machine for free for the quality problem. If the damage is caused by your improperly operation, the cost of the maintenance burden by you. we also provide you the  life-long follow-up service.

We DOING Company as a leading manufacturer in China has specialized in all kinds of waste recycling machinery for about 10 years, 5 years experience for domestic market, and 5 years for foreign trading. We  have developed and designed many kinds of waste processing machines, such as waste tire recycling machine, waste plastic recycling machine, waste oil recycling machine, waste copper wire recycling machine, waste aluminum-plastic panel recycling machine, waste PCB recycling machine,  waste home appliances recycling machine, etc.

Our office is in Zhengzhou City, Henan Province, which is in the middle of China and famous for manufactoring all kinds of machinery. From Zhengzhou International Airport to our office just need 30 minutes. Welcome you to our factory for a visiting!