Plastic compressing and agglomerating machine/plastic compression agglomerator

Specifications

Sell Plastic compressing and agglomerating machine/plastic compression agglomerator

The plastic flakes Densifier is used to granulate the thermal plasticity film or profile that its thickness is less than 2 mm into particles directly. The soft PVC, LDPE, HDPE, PS, PP, foam PS and other thermoplastics are suitable for it.

When the wasted plastic is putted into the container of machine, it will be cut into smaller chips due to the crushing function of the rotating knife and fixed knife. During the crushing processing, the material that soaked up lots heat from the frictional movement of material being crushing and the wall of container will be going to becoming semi-plasticizing state. The particles will stick with each other due to the function of plasticization. Before it sticks each other completely, the cold water pre-prepared is sprayed into the material being crushed. The water will be evaporated off quickly and the surface temperature of material being crushed drop down quickly also. So the material being crushed will become particles by means of the result of crushing of rotating knifes and fixed knifes. It is easy understood that the particles size is not same and can be colored by using of color agent being putted into the container during the crushing processing.
The particles can be used for extruder or injection mould machine. It is possible that the particles can be palletized again by palletizing extrusion line for some advanced requirements.