JinXin tungsten carbide tips/cemented saw tips/blade/inserts

Grade

Density

Hardness

TRS

(g/cm³)

(HRA)

(Mpa)

YG6

14.9

91

1800

YG6X

14.8

92

1800

YKM6A

14.7

92.5

1800

YG8

14.8

90

1950

YT5

13

90.8

1900

YT14

11.5

91.5

1500

YT15

11.3

91.8

1450

YW1

13.1

91.5

1600

YW2

13.1

91

1600

YS25

12.8

91.5

1900

YC30S

12.8

91

2000

ZP35

12.8

91

2000

YC40

13.2

90

1850

ISOClassification/Chinese Grade

Use Conditions

P 10(YT15)

Quality Ht for high speed turning and treading operations with medium and small chip section. Can be used for light rough machining of carbon steel and for finishing operations. Discontinued cutting should be avoided.

P 20(YT14)

To be used for turning operations with medium and large chip section on rigid machines. Can be used for finishing operations as well.

P 30(YT5)

Suited for low and medium speed turning operations. Medium and large chip section in little favorable working conditions. This quality is tit for universal applications.

M 10(YW1)
M 20(YW2)

Quality suited for finishing and light rough machining of alloyed and stainless steels in good working conditions. Small and medium chip section.

K 10(YG8A/YG8X)

Quality used for turning hard cast iron and light alloys such as brass, glass, porcelain, very hard hardened steel, tool steel, stainless steel, manganese steel, stellite, etc. Any vibration or stress whatever should be avoided while machining.

K 15(YG6)
K 20(YG8/YG8N)

General use quality, particularly efficient in machining of cast iron, copper, brass, etc..even with discontinued cuttin