Tungsten Insert Cemented Carbide Brazed Carbide Tips

FOB Price

USD $2 - $70 / Kilogram

5 Kilograms(Min.Order)

Supply Ability 1000000 Kilogram / Kilograms per Month
Port Guangzhou/Shenzhen/Ningbo/Shanghai
Payment TermsT/T L/C D/P D/A Credit Card PayPal

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Details

Place of Origin	Hunan, China		Brand Name	JinXin
Model Number	C116

Product Description

Cemented Carbide Brazed Carbide Tips

Choosing method of selecting carbide welding insert grade:

It is an important technology of using cemented carbide welding blades to choose a suitable grade. Grade is the material of cemented carbide chips. It is direct matteringt the machining cost and cuttingefficiency.

Different material need different grade. For example, ordinary carbon steel and alloy steel are need different grade. So in order to pick up the most suitable grade, we should know well about the performance and application of each grade. Here for your reference, we list the qualification and usage of each grade as below:

ISO Classification Grouping Code	Grade	Physical and mechanical properties			Recommended Use
ISO Classification Grouping Code	Grade	Density	HRA(HV)	Mpa	Recommended Use
K05	YG3	15.0	90.5	1300	Applicable to cast iron, non-ferrous metal finishing.
K10	YG6X YG6A	14.8 14.7	91 91.5	1560 1510	Applicable to cast iron, non-ferrous metal finishing and semi-finishing; manganese steel and hardened steel processing can also be used.
K15	YG6	14.9	89.5	1670	Applicable to roughing of cast iron and light alloys; also for milling of cast iron and low-alloy steel.
K20	YG8	14.6	89.0	1840
M10	YW1 YW3 YW4	13.0 12.9 12.3	91 92 92	1290 1390 1390	Applicable to stainless steel and ordinary steel finishing and semi-finishing.
M20	YW2	12.9	90.5	1460	Applicable to stainless steel and low-alloy steel semi-finishing, mainly used to train tire processing.
P10	YT05 YT15	12.6 11.3	92.5 91.0	1260 1300	Applicable to finishing and semi-finishing of steel and cast steel, should adopt a moderate amount of feed and high cutting speeds.
P20	YT14 YS30C SC30 YS25	11.4 12.5 12.9 13.0	90.5 91 91 90.5	1400 1740 2000 1780	Applicable to finishing and semi-finishing of steel and cast steel, should adopt a moderate amount of feed and the milling speed of YS25 dedicated to steel and cast steel.
P30	YT5	12.8	89.5	1560	Applicable to heavy cutting of steel and cast steel and the low-speed large amount of feed roughing in poor operating conditions.
K05-K10/M20	YT26	14.0	92.5	1600	High red hardness, good cold resistance. Suitable for finish and semi-finish machining of chilled cast iron, non-ferrous metal, and can also using in turning and milling of manganese steel, chilled steel.
K20	YD201	14.9	91.0	1800	Suitable for semi-finish and rough machining of cast iron and light alloy, and can also use in milling of cast iron and low alloy steel.
M05-M10	YS8	13.9	92.5	1720	Suitable for finish machining of iron-based and nickel-basedhigh temperature alloy, high strength steel. And can also use in finish machining of chilled cast iron, heat-resistance stainless steel, high manganese steel and chilled steel.
M20	YM20	13.0	91.0	1750	Suitable for medium cutting speed and feed rate semi-finish turning and semi-finish milling of steel, cast iron, manganese steel and grey cast iron.
P30	YC30S	12.9	90.0	1600	Suitable for milling machining of steel, cast iron and alloy steel.
P35-P40	YC40	12.9	91.0	2200	Suitable for bad conditions, low cutting speed turning and large feed rate turning of steel and cast steel.
P40	YM40 YC45	12.75 12.75	90.0 90.0	2100 2300	Suitable for gravity turning of steel and cast steel. Using large cutting data, as well as section milling.

Zhuzhou Jinxin Cemented Carbide Co., Ltd, specializes in manufacturing a series of Tungsten Carbide products.such as: Carbide roller /Carbide Saw Tips /Carbide Buttons for Rock Bits /Carbide Inserts for Road Milling /Plaing Bits /Carbide Inserts for Coal Cutter Picks /Carbide Inserts for Snopw Plow Blades /Carbide Inserts for Mining Tools /Carbide Round Rods (dia from 1.0 to 25.4 mm) /Carbide Tubes /Carbide tips for Debarking Bits /Carbide Brazed Inserts or Tips /Carbide pins /Tire studs /Carbide Blanks /Carbide Wear-Parts, etc.

All of our tungsten Carbide Products are made from the high-purity Original/Virgin Raw Materials and HIP/Sintered, with very high quality and excellent performances. Also the price is very competitive.

We are a factory which specialized in produce Tungsten Carbide Tools, especially for Tire studs, Carbide Rod, Carbide Plate, Rock drill bit, Milling cutter, CNC Inserts, Saw tips,Wrie Drawing and so on.

If you have any questions,please do not hesitate to contact me.

Gisselle Gan

Mobile:0086-15873358163

Whats up No.+86 15873358163

skype: jxcarbidewendy

Email: jinxin21(a)

Add.: No.28 Xinhua Road, Zhuzhou City, Hunan Province, China

Fax: 0086-0731-22332243

Contact Us

Zhuzhou Jinxin Cemented Carbide Co., Ltd.: Contact nameCanny Tang
Chat Now; Phone86-731-22332243; AddressCigu Tang No.9, Hetang district, Zhuzhou, Hunan

*Email
Please enter Your valid email address.
*To

Canny Tang
*Message
Your inquiry content must be between 20 to 5000 characters.
Please enter a correct verification code.

Product Categories

Carbide bars rods strips plates	Carbide Roll rings&Disc Cutter&Balls	Carbide Saw blade cutter	cemented carbide studs
CNC cutting tools	New Products	Non Standard carbide products	Rock/Oil/Gas/Mining drilling bit
traditional inserts brazed tips	tungsten carbide hard alloy&powder	tungsten carbide mining tips/buttons	tungsten carbide mould/die

Tungsten Insert Cemented Carbide Brazed Carbide Tips

You May Like

Product Details

Product Description

Contact Us

Product Categories

New Products

Popular Searches

Recommended Products

Find Similar Products By Category