Small cement brick making machine price in India

Small cement brick making machine price in India

Introduction of LQTM4-40 cement brick Making Machine

1.LQTM4-40 Cement Brick Making Machine can make different hollow block and solid block by changing mould. The way of molding is by board-vibration through two vibration motors. The blocks made by this machine have good density and strength.

2.The machine is simple, economic to run and maintain. It is the good machine for new starter.

LQTM4-40 hollow brick machine used the European advanced flat vibration manufacturing technique for reference, with the lower power; this hollow brick machine realizes the super strong vibration effect, mixing every material effectively. And the upper mould vibration compression makes the brick with average density and high strength, as well as the large-scale equipment.

Specifications:

 Production Output

LQTM4-40Cement brick Making Machine and HT350 mixer:

Block samples:

FAQ

1. What is the Raw Material of Block Making Machine of our company?
Our Equipment is Concrete Block Making Machine. The Raw Materials of Concrete are Water, Cement, Sand, Stone Powder, Fly Ash, Slag etc..
2. Which one of Block Making Machines is more suitable for me?
The Models of our Block Making Machine are QT10-15,QT8-15,QT7-15,QT5-15,QT4-15,each model has different Configuration. Our company also owns QTJ4-40 Concrete Block Making Machine and QTM5-40 Mobile Concrete Block Making Machine. Which one of machines is right for me? The following questions should be carefully considered by yourself. Firstly, what Block Size do you want to make? How many Blocks do you want to make per day? What is your budget for this block machine project? How much land do you have? We can choose the suitable  
3. Can we produce various sizes and shapes of Blocks?
Our machine can produce various sizes and shapes of Blocks by changing different Mould. Some of Moulds are available in our company. The Moulds also can be customized by customer’s block sizes and shapes. Or we can design the relative Mould based on your block size, picture or drawing. Normally one Mould can produce one kind of Blocks.
4. What should we do if machine do not work anymore?
We will send technicians for guiding Installation, Commissioning, and Trial Production while training the technicians of customer after the equipments arrived at the site; Normally our equipments do not have big problem. The Technicians of customer can take care of it with our help if any problems occur. We usually recommend customers to purchase part of Spare Parts as backup. Our company has more than ten years experiences for producing Block Making Machine with stable and reliable Equipment Quality.

Want a satisfying block making machine? Just send inquiry to us.