Africa Gold Panning Machine For Gold Processing Plant

                Africa Gold Panning Machine For Gold Processing Plant

1. Gold Panning Machine  Feature

  1)Steady recovery performance

   2)Environmentally friendly

   3)Low water and electricity requirements

   4)Low production costs

   5)Durable wear parts

   6)Minimal maintenance requirements

2. Gold Panning Machine Process

 Load Raw Material to Hopper—>Scrubber—>Washing Trommel—>Sluice or Concentrator—>Shaking Table—

Gold Furnace

Fixed sluice with gold carpet

Fixed sluice are simple design, no need for power, big capacity, for coarse granule, big

concentration ratio, easy maintain and easy use. But high strength work are for sluice 

cleaning. Fixed Sluice can do nothing for fine gold. Generally, fixed sluice gold recover

rate is lower than 50%.

Fluctuate sluice

Sluice soleplate is make of the natural rubber ,the electric machine drives the chute solepalate makes the 

up-and-down motion.

Centrifugal separator

Centrifugal separator is a important part in the set alluvial gold equipment.

Placer gold recovery rate can reach more than 95%. MaiJin monomer of gold in the grinding fineness

is less than 0.074 mm (65%), monomer recovery rate of gold can reach more than 98%.

 3. Gold Panning Machine Parameter

4. Gold Panning Machine Showing

This machine have exported to Ghana in 2014. The capacity is 100-150 ton per hour.  

5. Gold Panning Machine Shipping Pictures

6.Engineer go to install in Ghana

7.Working Site

 8.Company infomation:

1)We attach the development of scientific research, and form strategic partnership with the major

research institutions.

2)We had established good cooperation with Import and export trading company, established

Shandong magnetic equipment Research Instituting.

3)We have CAD Aided Design R & D center and physical mineral processing laboratory,

can work out reasonable and practical solution according to customer's technical requirements

and work site.

9.FAQ

1)--Application:This kind of gold trommel can be used for gold washing,gold

separating,gold panning,sand sieving and so on.

2)--Customized:This equipment should be produced customized according

to your mine situation,so the following information is necessary when enquiry:

A.--Working capacity(t/h) of the machine.

B.--Gold Diameter(mm)

C.--Mud content

D.--Iron content

E.--It is better if with mine pictures.

10.Please don't hesitate to contact me if have any problem.

                Alice Li

     Tel:0086-536-2105419

     Mobile:0086-13793603966

     Email:sales06 @miningmachine.net

     Skype:kedamachinery06