CE approved hot sale pellet cooling machine in

 Why we need pellet cooling machine?

Biomass pellets or briquettes from pellet machine or briquette machine are with high moisture content above 16% and high temperature degree about 70-85℃, therefore cooler is necessary to low down material temperature to 3-5℃ higher than room temperature and for safely stored or transported in case the mildew.

Cooled Pellets Show

 Introduction of pellet cooling machine

pellet cooling machine is necessary machine for biopellet plant. Typical applications are for cooling of feed pellets and wood pellets. It can reduce the temperature of pellets from 80~90℃to about 3~5℃ above ambient temperature. And the pellet moisture content is reduced from 17%~18% to 12%~13%. The Counter flow type pellets cooler adopts international advanced counter flow cooling technology, the cooler generates a premium effect of maintaining integrity of the pellets in the working process. With features of large capacity, smoothly functioning, high efficiency, the counter flow pellet cooler has been accepted by plenty of advanced countries.

Technical datas of pellet cooling machine

pellet cooling machine Working Principle
Those damp and hot particles from pellet machines are fed into cooler and scattered around evenly through feed distributor. Cold air go through wood pellets vertically and contact cold pellets; the warm air contact warm pellets but moves oppositely to the pellets dropped direction, thus makes the pellets cooled gradually. This working principle prevents cracks created by the contact of hot air and cold pellets. It is superior to traditional vertical type or horizontal type coolers.

Structure of pellet cooling machine

1>  Feeder: Ensures correctly and evenly feeding.
Outer drum: Used for gathering feed materials and hot air. Equipped with observation door and window for easily fixing.
2> Cooling room: To cool materials in a short period of time.
3> Discharging hole:  Powered by gas cylinder and electric engine.

 Features of pellet cooling machine

1. Large cooling room and cooling capacity.
2. Countercurrent cooling principle, reasonable design and good cooling effect.
3. Cold air enters from the bottom ensures high cold air efficiency.
4. Unique rotating structure to distribute pellets evenly and cool them completely.
5. Suitable to cool bulk, platy or particles materials, especially to puffing materials and other large volume material.

CE approved hot sale pellet cooling machine in Alibaba