SIEMENS electrical motor

wooden case

Specifications

1LG0 series has domestic Siemens motor characteristics as follows:

1.motor design manufacturing is EFF2 energy standard manufacture to Europe.

2.broadband wide presure design, protection grade IP55, class F inslution.

3.motor for matte paint appearance paint, environmental protection and energy saving.

4.all electrial junction box design can ratate 360 degree may be base on customer demand to creat the way in to line.

operation (S1) over a speed range
5. Frame and terminal box material grey cast iron
6. Standard color: stone grey (RAL 7030)
7 Available in 2, 4, 6 pole variants with efficiency grade 3 according to GB18613, and efficiency class IE1 according to IEC60034-30.
8. Specific would stators supporting multiple 3PH mains supply voltages at 50Hz or 60Hz
9. Frame Size 80mm-355mm
10. Rated power range 0.55kw up to 315kw @ 50Hz
11. Standard mounting types and variations (IEC60034-7)
12. TEFC with IP55 degree of protection (IEC 60034-5).
13. Overload capacity of1.5 times rated output torque for 2 minutes (IEC 60034-1)
14. Reinforced bearings for increased cantilever forces for FS100-355 as option.
15. V-ring as standard on DE rotor shaft for motor with FS80-FS132, and oil seal as option; Oil seal as standard for motor with FS160 and above.
16. Anti-condensation heater (space heater) as option
17. Winding protection with PTC and PT100 as option
18. Insulation class F, used according to temperature rise B
19. Flexible cable entry (Rotatable terminal box)
20. Rotor shaft with closed keyway (A type key) and NDE shaft extension
21. Dynamically balanced rotor with a half key
22. Drain plug on FS160-355 motor as standard
23. Ribbed end shields for better bearing heat dissipation and prolonged bearing life
24. Lubrication

1LG0 motors are suitable for pumps, fans, compressors and HVAC applications where variable or constant speed is required.

if  you are interesting in this product, get touch with us please.  we are looking for your inquiry.