Bottle Capping Machine (Electric)

Overview

The capping machine for the hand-held electric Capping machine, mainly used for mineral water bottle, medicine bottle caps, plastic caps, all kinds of thread cover unscrew or screw. Electric Capping Machine by capping the gun body, capping head, multi file transformer is composed of three parts, easy to carry. When working, capping head cover in the bottle top, capping head and cap gun body is connected, the switch is pressed, capping head rotation, slightly downward force, 0.3-0.5 seconds will tighten caps, once the cap screwing, card head automatically stops rotating, that you can move on to the next bottle. Adjustable screw cap on the gun body torque adjusting nut to realize the elastic cap, the adjustable clutch which can effectively avoid the bottle cap is broken, and reduce the inner wear. Because the torque constant elastic cap is consistent, thus ensuring the quality of the products. Screw cap gun adaptability, φ 10mm-50mm bottle can be applied, aerosol, essential balm deformed cover also apply, the effect is very good.

Technical parameters.

1,Voltage:220V 50Hz

2,Output voltage:36V,28V,20V

3,Output current:0.6A

4,Working speed:30-60 bottle/min

5,Capping dia:φ10-50mm

6,Capping height:Unlimited

7,Machine size:180*110*95mm

8,Machine wight:3kg

9,Clutch:adjustable

Operation steps

1, The screw cap machine for connecting the power cord and power box;

2,Connect the power supply, power box indicating lamp is bright;

3,The left hand button caps are bottle;

4,The left hand holding the screw cap of the bottle;

5,Right hand clenched screw cap machine, screw head vertical alignment bottle cap;

6,Right index finger press screw cap on the start switch, press down at the same time, until the screw cap machine clutch automatic clutch, issued a "dadada..." When the noise of the can, Capping completed. according to the elasticity of the rotating cap, capping head also does not need to be pressed too tightly;

7,Adjusting cap tightness can be adjusted by the distance between the screw head and screw machine adjustment nut, tighten the distance, the greater the cap spin too tight, the nut, the smaller the distance, cap screw loose.