Single Output Industrial DIN Rail Power Supply DR-120-24 120W 5VDC 12VDC 24VDC Switching Power Supply

Certificate:  CUL UL TUV CE CB EMC

MODEL

DR-120-12

DR-120-24

DR-120-48

OUTPUT

DC VOLTAGE

12V

24V

48V

RATED CURRENT

10A

5A

2.5A

CURRENT RANGE

0 ~ 10A

0 ~ 5A

0 ~ 2.5A

RATED POWER

120W

120W

120W

RIPPLE & NOISE (max.)

80mVp-p

80mVp-p

120mVp-p

VOLTAGE ADJ. RANGE

12 ~ 14V

24 ~ 28V

48 ~ 53V

VOLTAGE TOLERANCE

±2.0%

±1.0%

±1.0%

LINE REGULATION

±0.5%

±0.5%

±0.5%

LOAD REGULATION

±1.0%

±1.0%

±1.0%

SETUP, RISE TIME

500ms, 70ms/230VAC 500ms, 70ms/115VAC at full load

HOLD UP TIME (Typ.)

36ms/230VAC     32ms/115VAC at full load

INPUT

VOLTAGE RANGE

88 ~ 132VAC/176 ~ 264VAC by switch             248 ~ 370VDC

FREQUENCY RANGE

47 ~ 63Hz

EFFICIENCY (Typ.)

80%

84%

85%

AC CURRENT (Typ.)

2.6A/115VAC          1.6A/230VAC

INRUSH CURRENT (Typ.)

COLD START 20A/115VAC          40A/230VAC

LEAKAGE CURRENT

<3.5mA / 240VAC

PROTECTION

OVERLOAD 

105 ~ 150% rated output power

Protection type : Constant current limiting, recovers automatically after fault condition is removed

OVER VOLTAGE

15 ~ 16.5V

29 ~ 34V

58 ~ 65V

Protection type : Shut down o/p voltage, re-power on to recover

OVER TEMPERATURE

85°C ± 5°C (TSW1)

90°C ± 5°C (TSW1)

90°C ± 5°C (TSW1)

Protection type : Shut down o/p voltage, recovers automatically after temperature goes down

ENVIRONMENT

WORKING TEMP.

-10 ~ +60°C (Refer to "Derating Curve")

WORKING HUMIDITY

20 ~ 90% RH non-condensing

STORAGE TEMP., HUMIDITY

-20 ~ +85°C , 10 ~ 95% RH

TEMP. COEFFICIENT

±0.03%/°C (0 ~ 50°C)

VIBRATION

10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6

SAFETY & EMC (Note 4)

SAFETY STANDARDS

UL508, UL60950-1, TUV EN60950-1 approved

WITHSTAND VOLTAGE

I/P-O/P:3KVAC     I/P-FG:1.5KVAC     O/P-FG:0.5KVAC

ISOLATION RESISTANCE

I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH

EMC EMISSION

Compliance to EN55011,EN55022 (CISPR22) Class B, EN61000-3-2,-3

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), heavy industry level, criteria A

OTHERS

MTBF

136.8K hrs min.      MIL-HDBK-217F  (25°C )

DIMENSION

65.5*125.2*100mm (W*H*D)

PACKING

0.79Kg; 20pcs/16.5Kg/1.29CUFT

NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.