YUMO LFS-03 5mbar 2500mbar Pressure control switch electronic water pump pressure control switch Pressure sensor

  LFS-03 YUMO 100mbar Pressure control switch electronic water pump pressure control switch Pressure sensor

LFS-03 can be is applied to both pressure (15~2500mbar) and vacuum ( -600 to -15 mbar). Impact size, low cost

Photos of the product:

  LFS-03 YUMO 100mbar Pressure control switch electronic water pump pressure control switch Pressure sensor LFS-03 YUMO 100mbar Pressure control switch electronic water pump pressure control switch Pressure sensor LFS-03 YUMO 1 Pressure switch is a simple pressure control device, when the measured pressure reaches the rated pressure switch alarm or control signal is issued. Pressure switch works is: When the measured pressure exceeds the rating, the free end of the elastic element is displaced, after pushing the switch element comparison directly or change-off state of the switching elements to control the measured pressure purposes. Elastic element pressure switch uses a single coil spring tube, diaphragm, bellows and bellows. Switching element magnetic switches, mercury switches, micro-switches and the like. Switch type pressure switches are normally open and normally closed two. Accuracy: indicates the precise extent of the value of equipment, including linearity, tolerances, hysteresis, and repeatability. Nagano is currently the most accurate up to a pressure switch ± 0.5% FS, Model CB33. The maximum pressure (Max.P): the maximum pressure range. Full scale (FS): the pressure difference between the maximum and minimum range. Take-off difference (dead zone): refers to switch the action value and reset value of the difference between, for example, when setting the value 1MPa, actual reset value 0.9MPa, the pick-off difference is 0.1MPa. 00mbar Pressure control switch electronic water pump pressure control switch Pressure sensor.