electric submersible transfer pump explosion proof

electric submersible transfer pump explosion proof

1.Max. temperature: 40C
2.Max. solids: 70mm
3.Double Shaft Seal
4.Certificate: ISO.CE

electric submersible transfer pump explosion proof structure

1. ) Impeller: With single-channel or double-channel impeller, which is similar to an elbow of the same section, the pump is particularly suitable for the medium containing solid particles( particle size: 50% pump flange size).
2. ) Mechanical seal: Double-channel mechanical seal in series(doule seal type), with durable wear and corrosion resisting seal material. 
Motor side: Ceramic/Ceramic 
Pump side: Silicon carbide/Hard Alloy 
3. ) Bearing. Three sets. One at the motor side and two at the pump side. SKF and NTN type bearing available if request. 
4. ) Oil and water probe: Once the mechanical seal damages and water comes insides, the probe will send out signal to make the protection action. 
5. ) Float switch: If request, with pump control cabinet, the float switch can automatically control the pump stop/start according to the water level 
6). Movable and fixed installation optional, and double guide automatic rail available. 
7. ) Motor: Insulation class: Class F, and protection class 58

electric submersible transfer pump explosion proof performance 

electric submersible transfer pump explosion proof curve

electric submersible transfer pump explosion proof feature

1 Widely Used: suitable for conveying liquid with solid particles of gravel, cinders, tailings,slurry etc. It’s mainly used in river/mining dredging,
2 High Efficiency: pumps are not limited by suction, and thus have high efficiency in slag suction, and clear silt more thoroughly.
3 Powerful Impellers: In addition to the main pump impeller, agitation impeller is equipped at the bottom to help break and mix the sludge.
4 Long Wear Life: The pump is constructed with abrasion resistant materials - chromium alloy.