Junction Box EKM 2035 for DII E27 fuses size,Connection Box

Application

This connection box is intended to be installed in lighting ccolumns at the connection between looped-through feeder cables and the luminaire components protected by fuses.Special equipment as MCBs,timers,residual current devices or the like can be intergrated on DIN rails

Selection Criteria

• For application inside of Lighting columns

          Pole diameter: ≥ 90 x 300 mm

          Door size:         ≥ 110 mm

• 4 sliding terminals for 

          2 cables            4 - 50 mm² or

          3 cables            4 - 35 mm2

• Optional Fuses D II (E27) up to 25 A
• Optional for standard installation devices on DIN-rail attachable up to 3 TE width (3 x 18mm),max.height of devices 75 mm.

Technical Data

• Acc. IEC 60439-1
• Impact resistant thermoplastic
• All metal parts corrosion protected 
• Transparent fuse cover
• Ingress Protection: IP 43
• Class of Protection II
• Range taking self adapting cable sealing

          Φ 16 - 35 mm feeder cable

          Φ 8 - 14 mm luminaire cable

          (2 sealing for 2 luminaire cables  3 x 1.5 mm2 - 5 x 2.5 mm2)

          or 2 x 4 wires  Φ 1.5 - 3 mm

^* Connection block only and screws for fuse sockets

** Connector block only and DIN-rail for up to 3 MCB

Note: Fuses, adapter screws and screw craps not included.

 Junction Box EKM 2035 for DII E27 fuses size,Connection Box

Certifications

 Welcome to contact usJunction Box EKM 2035 for DII E27 fuses size,Connection Box