Clients Liked Wood Chipper Machine

clients liked wood chipper machine

Drum chipper is the professional equipment for production of wood chips, can cut logs, wood branches, slab, waste veneer, bamboo, cotton stalks and other non-wood fiber rod stems into a certain size flakes . It is the first choice of equipment in the production of preparation session for other industrials and wood chips manufacturer to manufacture particleboard, fiberboard, plywood, pulp and paper. Similarly to bio-power plants and wood chip factories.

Drum chipper machine produced by our plant, consisting of the base, knife roll up and down feed roller conveyor, hydraulic systems and other components. Base with a high degree of welded steel plate is supported by the foundation of the whole machine. The blade roll with two or three, four knifes. Flying bolt with specially manufactured through pressure block, fixing the knife on the blade roll. According to the thickness of the material, the feed roller assembly can make use of the hydraulic system to fluctuate within a certain range. The qualified flakes which are cut down, falling through the screen holes, discharged from the bottom. Large flakes will be re-cutting in the machine. Hydraulic system: From the oil pump to the fuel tank, can start the cover, which is convenient to replace blades. The feed roller assembly can be lifted when in maintenance, which is easy to adjust the knife, the knife gap and comb bottom plate disassembly.

Drum Wood Chipper Features:

(1)Strong adaptability: Because of using assembly technologies of a host equipped with self-discharge system and host integration with the main motor base, eliminating the production of host-based foundation and the main motor, can be adapted to install and use in different geographical, topographical conditions, ignore the season, climate, and other the influence of external conditions.

(2)Saving time: Free for the foundation, users can save valuable time 10-15 days. Equipment can be immediately to the installation, operation after being transported usually 1-2 days to complete, saving 2/3 of the time than usual.

(3)Saving money: Free for the foundation, which can make savings for the user on human, material, and financial resources.

(4)Flexible and convenient: Because no installation in the machine, installation and commissioning of the equipment is very simple, greatly improves the speed and flexibility of installation. Because it has the feeding device of band two, the user can change the direction of the material according to the needs and be flexible to use.

Installation & Training & service

1, Our factory has been set up for many years, and we have a lot of professional technological people in wood pellet machine, wood drum chipper, and other wood equipments, they are ready to service for you at any time;

2, We candesign and manufacture wood chipperfor you according to your special requirements;

3, You can find thebest price of the wood chipperfrom here, because we are the factory, and we are factory directly sales;

4, Our company will free of charge to arrangetechnical personnel for installation and training customer's workers until they can operate the wood pellet machine skillful.

5, We offertimely and effective service.

my contacts