Energy saving high oil rate Screw press oil machine with factory price

Press enter when running, pressing chamber from the hopper after dealing with oil. By pressingthe material embryo spiral constantly pushing, pressing. The blank is in the state of motionunder the press of the squeezing chamber, the pressing chamber pressure conditions, the friction between the blank and the screw, blank and pressing chamber, so that the blank materialbetween the micro friction, resulting in relative motion. On the other hand, because the rootdiameter of the screw park is gradually enlarged, the pitch is gradually reduced, so when thescrew rotation, screw and the blank that can move forward, but also can be turned outwards,and close to the screw thread surface layer with the shaft rotation. So in the squeezing chamberfor each blank particles are not the same as the speed, direction of movement, but also has the relative motion between the particles. The heat generated by friction and meet the required oil extraction process of heat, contribute to the protein thermal denaturation to blank, destruction of the colloid, increased the plastic, but also reduce the precipitate to some viscous oil, thus improving the oil press oil yield, the squeezed material the oil pressure, andfrom Park row gapand discharge gap outflow.