hot tyre retreading machine

Specifications

Tire retreading machine-used tire recycling equipment

Specification:6-18pcs Curing Chamber for Truck Tyre
Range of Tyre Size:Within Size of 12.00-24 Truck and Passage Bus Tyre
Operating Worker No.:Min. 5 Staff(8 staff better)
Workshop Area:Min. 150m2
Max Service Power:65kw(Complete working)
Curing Time:220Minutes/per shift(Timing at 112°C)
Max Daily Work Shift:6 tank/day(24 hours)
Max Daily Output:96pcs/day for within ruled max size tyre
Min Required Power:380V,50HZ.,65KW
Min Required Air Supply:0.8Mpa
Min Air Compressor:1pcs(Air Displacement:1.4m3/min;Work Prssure:1.25Mpa;Auto Power:15KW
Min Required Air Storage:1pc(Storage Volume:1M3;Work Prssure:1.25Mpa;Temperature:100°C)

The Dongsheng Rubber Machine Company complete retreading production line are mainly included:
Tire retreading machines-Curing chamber, Vulcanizing Tank, buffing machine/grinding machine, tread building machine, rubber stirring machine, rubber extruding machine, envelope spreader, steel rim disassemble machine, rubber crumb dust collector, tyre conveyor/Monorail, repair machine, handcart, hook, inspect machine, all necessary accessories, etc.

Tire retreading machinery-Curing Chamber

The tyres are placed in this curing chamber and the pre-cured tread becomes adhered to the tyre through a vulcanizing process.
Our wide engineering capabilities and experience enable Dongsheng Co.,  to build chambers to suit our clients' different preferences for size, steam heated, electric heated, or double heating system, semi-automatic and automatic chambers. 

Tire retreading machine-tyre buffing machine
The tyre's old tread is mechanically removed on high speed buffers. Dongsheng's buffers are extremely accurate and will remove the proper amount of old rubber while turning the tyre to an exact specified diameter and radius.

Tire retreading machinery-tire tread building machine

In the pre-cure system, the tread rubber has already been vulcanized with the new tread pattern design. The pre-cured tread rubber is then applied with the building machine. This is called the Dongsheng Building Process

Tire retreading machine-package envelope

For enveloping, tyres are first fitted an outer envelope at the envelope-mounting table before the inner envelope is fitted into them. The enveloped tyres are then vacuumed out for preparation prior to curing. With professional planning from Dongsheng engineers, you can be assured of workstations designed to maximize output and ease workflow

Tire retreading machine-tire crumb dust collector

This is used to collect tire dust crumb which buffed off tire old tread, Its working together with Buffing machine. 

Tire retreading machine-the tire rim unloading machine/rim disassembling machine

This is used to easily remove the steel rings, Pneumatic elevator, lift the tires easily

Tire retreading machine-tire repair support/stand

Repair support use for support the tire when repair the tire

Tire retreading machine-tire conveyor/Monorail

The monorail & hook system increases productivity by cutting down on chances of casings contamination and allows for faster loading and unloading of tyres.

Other accessaries: envelope, steel rims, sulfide inner tube, repair tools ,air compressor and other necessary small parts.

contact us: